Dual JLM99V Discrete IC
Mic pre Kit are receiving rave reviews.
JLM AC/DC Power
supply PCB & Kits. Gives +/-5v to 34v and 48v form 25vac for
running mic pres etc
JLM 1272 to 1073 mod kit
used in our 2 x 1272 racks with Fet Active DI input,
Gain Switch, Trim Pot and 48v, PAD, Phase switches.
New Kits.
NewBaby Animal Mic pre. Single 99v or IC opamp mic
pre that runs on one 48v power rail. Input
transformer with 48v, 20dB Pad and Phase
switches on board using either toggles of pushbutton
switches. Only need 7 wires connected to
complete a balanced in and out mic pre. PCB takes
several input transformers and opamps. DI kit below
also plugs in on board IDC connector to give DI if
needed.
New
Active DI
kit. 1Meg input impedance Fet input active DI that can drive
200ohm loads and runs from a 12v to 48v power rail.
New
Go Between kit. Give three
toggles for soft start 48v, 20dB Pad & Phase reverse
and has IDC plug for adding the Active DI Kit
quickly and easily. Great for racking API312 ,QE
CA27 amp type cards and giving full Mic Pre
functions.
Kit Parts....
JLM99V Opamp
JLM1:1:1DC gapped output transformer
JLM1:4 mic input transformer
Dual 10k Rev Log pots with 41
detents
JLM 4136 Quad opamp to 2 x
Dual opamp adaptor
JLM Micro1290 Available now.
Click on Photo to find out more.