JLM 4136 Converter Socket
Features
- This socket once fitted to equipment that
used 4136 quad opamps allows modern quad package & dual package
opamps to be used instead. The original 4136 can be refitted to the
centre position. A modern quad opamp with the same pinout as a
TL074, LM837 can be fitted to the left side. Or two dual package
opamps with the same pinout as a NE5532A, LM833, OPA2604AP can be
fitted to the right side.
- This Socket is especially useful for
replacing 4136 opamps in UREI LA4 Compressors as it allows the 4136
to be refitted at any time to return the unit to standard or for
comparison of different opamp type sounds.
- PCB is double sided with solder mask and
measures 15.24mm (0.6inch) wide x 20.32 (0.8inch) high. To fit
socket there needs to be 2.5mm (0.1inch) of space around the left,
right and bottom of the IC. Or at least components lower than 8mm
(0.32inch) in this area as the socket has strong long pins that
allow it to be mounted this high above the PCB if needed.
-
- We can also configure this socket to
convert Quad TL074, LM837, etc to 2 x Dual NE5532A, LM833,
OPA2604AP, etc
- JLM 4136 Converter Socket $25AUD (2 or 3
for Silver Face. 1 or 2 for Black face)
Recommend for LA4
8 pin Wire wrap socket for black face $2AUD (1 needed)
NE5534A (1 needed for black face)
NE5532A (2 needed for each adaptor)
OPA2604 (2 needed for each adaptor)
TL072 (2 needed for each adaptor)