Time at JLM Shop:
We will be closed for holidays from the 18th to 26th September 2021. Feel free to place orders on the JLM webshop. But orders will not start shipping out until the 27th of September.

Sontec / ITI mods

This field is required.
  • HS3099 Opamp

    HS3099 Opamp

    HS3099 opamp is a modern version of the Sontec HS2000 & HS2030 in a 2520 / 990 footprint but with several improvements for longer reliable life without tonal changes. Voltage range +/-24vdc or +/-28vdc @ 40mA no load. Frequency range DC to 10MHz. Hand matched devices. Improved constant …
    Servo pin will be used via 51k? (Required)
    Voltage (Required)
    This field is required.

    $192.50AUD inc GST for Australian Customers
    (Approx $131.88USD outside Australia)

    Stock Level11

    $192.50AUD inc GST for Australian Customers
    (Approx $131.88USD outside Australia)

    Stock Level11
    This field is required.
    Servo pin will be used via 51k? (Required)
    This field is required.
    Voltage (Required)
    This field is required.
  • NE5533 to 2xNE5534A Adaptor

    NE5533 to 2xNE5534A Adaptor

    Socket adaptor for replacing NE5533 dual opamps with two modern single DIP8 opamps like NE5534AP etc.  

    $22.00AUD inc GST for Australian Customers
    (Approx $15.07USD outside Australia)

    Stock Level50

    $22.00AUD inc GST for Australian Customers
    (Approx $15.07USD outside Australia)

    Stock Level50
  • HS7000 Opamp

    HS7000 Opamp

    HS7000 opamp is a modern version of the Sontec HS6000 but with several improvements for longer reliable life without tonal changes. The HS7000 can also replace HS6000 and also 990 / 2520 foot print opamps in Sontec clones and other equipment. When ordering let us know if you want them as Sont…
    Pinout type (Required)
    This field is required.

    $104.50AUD inc GST for Australian Customers
    (Approx $71.59USD outside Australia)

    Stock Level2

    $104.50AUD inc GST for Australian Customers
    (Approx $71.59USD outside Australia)

    Stock Level2
    This field is required.
    Pinout type (Required)
    This field is required.
  • ITI to Sontec Filter

    ITI to Sontec Filter

    Plug in Sontec Filter to replace old ITI EQs filter pcb with potted rectangle filter opamps. Replaces broken ITI Filter modules with Sontec type filter.  The ITI to Sontec Filter replaces the below type ITI filter modules.  

    $77.00AUD inc GST for Australian Customers
    (Approx $52.75USD outside Australia)

    Stock Level8

    $77.00AUD inc GST for Australian Customers
    (Approx $52.75USD outside Australia)

    Stock Level8
  • ITI Filter Adaptor

    ITI Filter Adaptor

    Plug in adaptor to replace old ITI EQs filter pcb with potted rectangle filter opamps. Allows discrete opamps like JLM99v, JLM 25HV, JLM35HVFET, FLICK535, HYBRID etc to plug in and run on +/-24v or +/-28v power rails. The ITI filter adaptor replaces the below type ITI filter modules. …

    $55.00AUD inc GST for Australian Customers
    (Approx $37.68USD outside Australia)

    Stock Level5

    $55.00AUD inc GST for Australian Customers
    (Approx $37.68USD outside Australia)

    Stock Level5
  • ITI Opamp Adaptor

    ITI Opamp Adaptor

    Plug in adaptor to replace old ITI EQs amp pcb with 3 potted rectangle opamps. Allows discrete opamps like JLM99v, JLM 25HV, JLM35HVFET, FLICK535 etc to plug in and run on the +/-28v power rails. The ITI Amp adaptor replaces the below type ITI audio path modules.

    $99.00AUD inc GST for Australian Customers
    (Approx $67.83USD outside Australia)

    Stock Level5

    $99.00AUD inc GST for Australian Customers
    (Approx $67.83USD outside Australia)

    Stock Level5
  • HS3030 Opamp

    HS3030 Opamp

    HS3030 opamp is a modern version of the Sontec HS2030 but with several improvements for longer reliable life without tonal changes. The HS3030 can also replace HS2000 with a quick desolder of a solder link. If using as HS2000 leave note in comments so we will setup the opamp before shipping. …

    $192.50AUD inc GST for Australian Customers
    (Approx $131.88USD outside Australia)

    Stock Level45

    $192.50AUD inc GST for Australian Customers
    (Approx $131.88USD outside Australia)

    Stock Level45
  • Sontec HS10** SMD Opamp Adaptor

    Sontec HS10** SMD Opamp Adaptor

    Plug in adaptor for old Sontecs EQs or Comps with potted rectangle opamps like HS1000, HS1020 and HS1050. Allows discrete opamps like JLM99v, HYBRID SMDv2, FLICK SMD, 990, 992, 993 etc to plug in and run on either +/-28v or +/-24v by soldering or unsoldering 4 solder pads.   Unsolder link…

    $33.00AUD inc GST for Australian Customers
    (Approx $22.61USD outside Australia)

    Stock Level27

    $33.00AUD inc GST for Australian Customers
    (Approx $22.61USD outside Australia)

    Stock Level27
36
Top

 

© 2001-2021. All rights reserved.