Time at JLM Shop:
LA500A & PEQ500A built and kits back in limited stock. If you want one order ASAP.

500 DIY Kits

This field is required.
  • GEQ500 Graphic EQ Kit

    GEQ500 Graphic EQ Kit

    GEQ500 KIT is a 16 Band Graphic EQ based on the 560 but with 6 extra bands and 3 switchable boost/cut ranges +/- 3dB, 6dB & 12 with RGB led to show range and EQ in. Can be switched to OUT which leaves DOA & transformer audio path inline or BYPASS which relay hard bypass the whole 500 module. If…
    Opamp (Required)
    Output Transformer (Required)
    This field is required.

    $495.00AUD inc GST for Australian Customers
    (Approx $304.43USD outside Australia)

    Stock Level23

    $495.00AUD inc GST for Australian Customers
    (Approx $304.43USD outside Australia)

    Stock Level23
    This field is required.
    Opamp (Required)
    This field is required.
    Output Transformer (Required)
    This field is required.
  • PEQ500A Passive EQ Kit

    PEQ500A Passive EQ Kit

    5.0 average, based on 1 reviews

    PEQ500A KIT is a full Pultec EQP-1A & EQP-1R type passive EQ circuit combined but with 8 extra low frequencies and 5 extra high frequencies. The BW (bandwidth) control for the high boost bell curve can go twice as wide as a normal Pultec and it can also do one thing I have never seen on any othe…

    $548.90AUD inc GST for Australian Customers
    (Approx $337.58USD outside Australia)

    Stock Level3
    PEQ500A Passive EQ Kit

    PEQ500A Passive EQ Kit

    5.0 average, based on 1 reviews

    $548.90AUD inc GST for Australian Customers
    (Approx $337.58USD outside Australia)

    Stock Level3
  • 500 / 51X to DBX900 Series Adaptor

    500 / 51X to DBX900 Series Adaptor

    500 / 51X to DBX 900 series adaptor Kit. Allows 500 or 51X series modules to plug into DBX900 series racks Please note The 2 mounting holes on 900 series racks are slightly different spacing to 500 / 51X series so holes in 500 module may need to be made slightly larger. The gap between t…
    48v SMPS parts (Required)
    Built and Tested (Required)
    This field is required.

    $43.45AUD inc GST for Australian Customers
    (Approx $26.72USD outside Australia)

    Stock Level4

    $43.45AUD inc GST for Australian Customers
    (Approx $26.72USD outside Australia)

    Stock Level4
    This field is required.
    48v SMPS parts (Required)
    This field is required.
    Built and Tested (Required)
    This field is required.
  • Digital input module

    Digital input module

    Digital input SPDIF, TOSLINK, AES/EBU to Analog for VUPPM500 Stereo Meter Kit If AES card fitted input XLR is AES digital stereo input.  Build Thread here   

    $33.00AUD inc GST for Australian Customers
    (Approx $20.30USD outside Australia)

    Stock Level2

    $33.00AUD inc GST for Australian Customers
    (Approx $20.30USD outside Australia)

    Stock Level2
  • 500 Tester DUAL kit

    500 Tester DUAL kit

    5.0 average, based on 1 reviews

    DUAL 500 TESTER Kit for building and testing a pair of 500 modules separate from a 500 rack with our or any API standard 5 pin XLR power supply. If you have 5 pin XLR power supply with Pin 1 CHASSIS, Pin 2 GND, Pin 3 +16v, Pin 4 -16v, Pin 5 +48v it will work with our 500 testers fine. LEDs for…
    +/-16v@2A & +48v 65w SMPS
    Built and Tested (Required)
    This field is required.

    $65.45AUD inc GST for Australian Customers
    (Approx $40.25USD outside Australia)

    Stock Level21
    500 Tester DUAL kit

    500 Tester DUAL kit

    5.0 average, based on 1 reviews

    $65.45AUD inc GST for Australian Customers
    (Approx $40.25USD outside Australia)

    Stock Level21
    This field is required.
    +/-16v@2A & +48v 65w SMPS
    This field is required.
    Built and Tested (Required)
    This field is required.
  • VUPPM 500 Stereo Meter kit

    VUPPM 500 Stereo Meter kit

    5.0 average, based on 1 reviews

    New VUPPM500 Stereo Meter Kit 2x 40 LED Meter displays PPM and VU ballistics with peak hold at the same time.  50dB range. 30 x 1dB and 10 x 2dB steps Reversable Black PCB front panel with +18dBu scale on one side and 0dBFS on other. Mode Switch - VUPPM, Colour Mode 1, Colour Mode 2.…
    Digital Input Kit
    This field is required.

    $328.90AUD inc GST for Australian Customers
    (Approx $202.28USD outside Australia)

    Stock Level2

    $328.90AUD inc GST for Australian Customers
    (Approx $202.28USD outside Australia)

    Stock Level2
    This field is required.
    Digital Input Kit
    This field is required.
  • 500 Tester kit

    500 Tester kit

    500 TESTER kit for building and testing 500 modules separate from a 500 rack with our or API standard 5 pin XLR power supply. If you have 5 pin XLR power supply with Pin 1 CHASSIS, Pin 2 GND, Pin 3 +16v, Pin 4 -16v, Pin 5 +48v it will work with our 500 testers fine. LEDs for +16v, -16v and 48v…
    +/-16v@2A & +48v 65w SMPS
    Built and Tested (Required)
    This field is required.

    $54.45AUD inc GST for Australian Customers
    (Approx $33.49USD outside Australia)

    Stock Level5

    $54.45AUD inc GST for Australian Customers
    (Approx $33.49USD outside Australia)

    Stock Level5
    This field is required.
    +/-16v@2A & +48v 65w SMPS
    This field is required.
    Built and Tested (Required)
    This field is required.
  • FREQ500 Active EQ Kit

    FREQ500 Active EQ Kit

    5.0 average, based on 1 reviews

    FREQ500 kits will ship out 30th November 2023 FREQ500 kit is a very powerful 500 EQ module with fully variable 5 BAND + HPF active EQ. EQ that sounds natural. EQ circuit is a sidechain feed-forward equalizer so has an extremely low noise floor even at full boost. Separate PCB for Audio p…

    $493.90AUD inc GST for Australian Customers
    (Approx $303.76USD outside Australia)

    Stock Level3
    FREQ500 Active EQ Kit

    FREQ500 Active EQ Kit

    5.0 average, based on 1 reviews

    $493.90AUD inc GST for Australian Customers
    (Approx $303.76USD outside Australia)

    Stock Level3
  • SIDEKICK 500 Rack KIT

    SIDEKICK 500 Rack KIT

    SIDEKICK 8 way 500 Series Rack Kit   Features   8 Slots with 250 mA of power per slot Full compatibility with API 500 Series and VPR-approved modules Neutrik Gold XLR in and outs  DB25 in and out on the rear panel  Phantom Power Compre…
    500 series power supply (Required)
    SIDEKICK Rack GEARSAFE Lid (Required)
    SIDEKICK Rack Wings
    This field is required.

    $548.90AUD inc GST for Australian Customers
    (Approx $337.58USD outside Australia)

    Stock Level39

    $548.90AUD inc GST for Australian Customers
    (Approx $337.58USD outside Australia)

    Stock Level39
    This field is required.
    500 series power supply (Required)
    This field is required.
    SIDEKICK Rack GEARSAFE Lid (Required)
    This field is required.
    SIDEKICK Rack Wings
    This field is required.
  • Matched Opto Pair

    Matched Opto Pair

    Matched Opto Pair for LA500 and LA500A.

    $55.00AUD inc GST for Australian Customers
    (Approx $33.83USD outside Australia)

    Stock Level100

    $55.00AUD inc GST for Australian Customers
    (Approx $33.83USD outside Australia)

    Stock Level100
  • LA500A Opto Compressor Kit

    LA500A Opto Compressor Kit

    5.0 average, based on 4 reviews

    NEW LA500A Opto Compressor kit comes complete with every part down to the last nut and bolt.NEW A Version has extra Slow attack mod and link with leds on front panel and 3 PCB no wiring layout If you order a pair of LA500A kits together on the same order we will automatically match the opto pai…

    $548.90AUD inc GST for Australian Customers
    (Approx $337.58USD outside Australia)

    Stock Level5

    $548.90AUD inc GST for Australian Customers
    (Approx $337.58USD outside Australia)

    Stock Level5
  • LA500 Slow Attack Mod Kit

    LA500 Slow Attack Mod Kit

    5.0 average, based on 1 reviews

    Kit of parts to add pull for Slow attack mod to LA500 opto comp kits to make them into a LA500A. Kit has new reverse log makeup pot with pull switch which the link feature is move too freeing up the threshold pull switch for new slow attack parts also in this kit. LA500 slow attack mod install…

    $22.00AUD inc GST for Australian Customers
    (Approx $13.53USD outside Australia)

    Stock Level3

    $22.00AUD inc GST for Australian Customers
    (Approx $13.53USD outside Australia)

    Stock Level3
  • 500 51X Extender Cable Kit

    500 51X Extender Cable Kit

    5.0 average, based on 1 reviews

    Pair of PCBs to make 500 / 51X Extender cable for building and testing 500 / 51X modules outside of the powered rack frame. (Photo above shows 51X version. Below shows cut down 500 version) PCB are double sided gold plated. PCB's are simply snapped by hand into 2 pieces and jointed with 16 pin…
    Module Type (Required)
    Built and Tested (Required)
    This field is required.

    $43.45AUD inc GST for Australian Customers
    (Approx $26.72USD outside Australia)

    Stock Level21

    $43.45AUD inc GST for Australian Customers
    (Approx $26.72USD outside Australia)

    Stock Level21
    This field is required.
    Module Type (Required)
    This field is required.
    Built and Tested (Required)
    This field is required.
  • BA500 Ver2 Mic Pre Kit

    BA500 Ver2 Mic Pre Kit

    5.0 average, based on 1 reviews

    BA500 Ver2 mic pre kit comes complete with every part down to the last nut and bolt. You only need to pick the options for Input and output transformers, Opamp and DI input when ordering. Now with 2 BA500 pcb options. Standard BA500v2 PCB takes large JLM111PCB output transformer or NEW BA500v2503…
    Input Transformer (Required)
    DI Kit (Required)
    Opamp (Required)
    Output Transformer (Required)
    This field is required.

    $218.90AUD inc GST for Australian Customers
    (Approx $134.63USD outside Australia)

    Stock Level0
    Out of stock
    BA500 Ver2 Mic Pre Kit

    BA500 Ver2 Mic Pre Kit

    5.0 average, based on 1 reviews

    $218.90AUD inc GST for Australian Customers
    (Approx $134.63USD outside Australia)

    Stock Level0
    Out of stock
    This field is required.
    Input Transformer (Required)
    This field is required.
    DI Kit (Required)
    This field is required.
    Opamp (Required)
    This field is required.
    Output Transformer (Required)
    This field is required.
29
Top

 

© 2001-2024. All rights reserved.