Time at JLM Shop:

Power Supplies and Kits

This field is required.
  • UA Replacement 70w SMPS

    UA Replacement 70w SMPS

    UA 4110 / 8110 Replacement SMPS +/-27v @ 0.74A +8v @ 2.5A +48v @ 200mA 70w SMPS  Direct bolt-in replacement for UA 4110 / 8110 Mic Pre Amplifier. Replaces Powdec power supply and 48v/Mute PCB.  Runs on 100vac to 250vac mains power without switching. Super low noise & smooth 30dB oc…

    $396.00AUD inc GST for Australian Customers
    (Approx $237.94USD outside Australia)

    Stock Level1
    Info

    $396.00AUD inc GST for Australian Customers
    (Approx $237.94USD outside Australia)

    Info
    Stock Level1
  • UA Replacement 60w SMPS

    UA Replacement 60w SMPS

    UA 2192 Replacement SMPS +/-27v @ 0.74A + 8v @ 3A 60w SMPS  Direct bolt-in replacement for UA 2192 Master Audio Interface.  Runs on 100vac to 250vac mains power without switching. Super low noise & smooth 30dB octave filtered dc outputs. All dc outputs 100% regulated to correct volta…

    $319.00AUD inc GST for Australian Customers
    (Approx $191.67USD outside Australia)

    Stock Level2
    Info

    $319.00AUD inc GST for Australian Customers
    (Approx $191.67USD outside Australia)

    Info
    Stock Level2
  • AC/DC HV PCB

    AC/DC HV PCB

    ACDC HV PCB is ideal for generating 2 regulated DC voltage rails from 24v to 60vdc @ 1.5A . Ideal for PM1000 channels needing 44vdc and 48vdc from a single 40vac to 50vac transformer winding. All 4 mounting bolts can be used to connect to chassis ground as well as a case screw terminal. …

    $19.80AUD inc GST for Australian Customers
    (Approx $11.90USD outside Australia)

    Stock Level7
    Info

    $19.80AUD inc GST for Australian Customers
    (Approx $11.90USD outside Australia)

    Info
    Stock Level7
  • C6 +/- Dual Pump Charge 6 Rail Power Supply Kit

    C6 +/- Dual Pump Charge 6 Rail Power Supply Kit

    NEW C6 - 6 rail super power supply kit for racking of ATI channel strips that require +/-48v @ 0.5A & +/-20 to +/-24vdc @ 1.5A & 5v @ 1.5A & 24vdc @ 1.5A. Dual pump charge circuits so 2 x 24vac transformer can generate +/-70vdc unregulated. C6 has tracking and auto shutdown for each +/-V1 & +/-V3…
    Heatsink 200mm x 75mm x 48mm (Required)
    This field is required.

    $97.90AUD inc GST for Australian Customers
    (Approx $58.82USD outside Australia)

    Stock Level7
    Info

    $97.90AUD inc GST for Australian Customers
    (Approx $58.82USD outside Australia)

    Info
    Stock Level7
    This field is required.
    Heatsink 200mm x 75mm x 48mm (Required)
    This field is required.
  • Scorpion Tube Power supply Kit

    Scorpion Tube Power supply Kit

    JLM Audio Scorpion 30W tube power supply. 6-12v Filament, 48V & 2 × 50-300v power rails all regulated and trimpot adjustable. Switchable 115vac/230vac. VS sync allows syncing multiple Scorpion & Power plants with one 115vac/230vac voltage selection switch. Easy heatsink or case mount with on…

    $240.90AUD inc GST for Australian Customers
    (Approx $144.75USD outside Australia)

    Stock Level4
    Info

    $240.90AUD inc GST for Australian Customers
    (Approx $144.75USD outside Australia)

    Info
    Stock Level4
  • TMP8 48v 40w 840mA Switch Mode Power Supply

    TMP8 48v 40w 840mA Switch Mode Power Supply

    NEW TMP8 Large 48v 40w SMPS that is fully MEPS (Green energy rated) that can run on 80vac to 250vac without switching. Takes standard IEC power lead with 48v output on 5 Pin XLR connector. 

    $86.90AUD inc GST for Australian Customers
    (Approx $52.21USD outside Australia)

    Stock Level4
    Info

    $86.90AUD inc GST for Australian Customers
    (Approx $52.21USD outside Australia)

    Info
    Stock Level4
  • FET POWER SWITCHER KIT

    FET POWER SWITCHER KIT

    FET POWER SWITCHER Kit with PCB & PCb parts is used with our +/-16v@2A & +48v@120mA 65w SMPS power supply to give a simple single pole power switch that turns on the +/-16v and 48v with soft start using high current fets.

    $53.90AUD inc GST for Australian Customers
    (Approx $32.39USD outside Australia)

    Stock Level7
    Info

    $53.90AUD inc GST for Australian Customers
    (Approx $32.39USD outside Australia)

    Info
    Stock Level7
  • Powerstation 5 Rail Power Supply Kit v5 Easy Mount

    Powerstation 5 Rail Power Supply Kit v5 Easy Mount

    PowerStation Ver. 5 Easy Mount kit is a Linear based universal power supply which can generate 5 voltage rails from a single or dual 15 to 30vac power transformer.   Powerstation Ver 5 Easy Mount has rearranged PCB layout to even improve on its already outstanding performance and can mount …
    PCB Heatsink 5C/W & clamp OR L Bracket (Required)
    10 Amp Bridge Rectifier (Required)
    This field is required.

    $64.90AUD inc GST for Australian Customers
    (Approx $39.00USD outside Australia)

    Stock Level9
    Info

    $64.90AUD inc GST for Australian Customers
    (Approx $39.00USD outside Australia)

    Info
    Stock Level9
    This field is required.
    PCB Heatsink 5C/W & clamp OR L Bracket (Required)
    This field is required.
    10 Amp Bridge Rectifier (Required)
    This field is required.
  • AC/DC 3 Rail Power Supply Kit V5 Easy Mount

    AC/DC 3 Rail Power Supply Kit V5 Easy Mount

    AC/DC Ver. 5 kit Easy Mount is a Linear based universal power supply that generates 3 voltage rails from a single or dual 15 to 30vac power transformer. AC/DC Ver 5 Easy Mount has rearranged PCB layout to even improve on its already outstanding performance and can mount to side and bottom of c…
    PCB Heatsink 5C/W & clamp OR L Bracket (Required)
    This field is required.

    $53.90AUD inc GST for Australian Customers
    (Approx $32.39USD outside Australia)

    Stock Level10
    Info

    $53.90AUD inc GST for Australian Customers
    (Approx $32.39USD outside Australia)

    Info
    Stock Level10
    This field is required.
    PCB Heatsink 5C/W & clamp OR L Bracket (Required)
    This field is required.
  • +/-16v@2A & +48v@120mA 65w SMPS

    +/-16v@2A & +48v@120mA 65w SMPS

    NEW Large +/-16v @ 2A + 48v @120mA 65w SMPS that is fully MEPS (Green energy rated) that can run on 100vac to 250vac without switching. Takes standard IEC power lead with output on 5pin XLR connector conforming to API 500 rack pinout. Ideal for running 12 x 500 modules or 500 racks. …

    $198.00AUD inc GST for Australian Customers
    (Approx $118.97USD outside Australia)

    Stock Level94
    Info

    $198.00AUD inc GST for Australian Customers
    (Approx $118.97USD outside Australia)

    Info
    Stock Level94
  • V6 6 Rail Power Supply Kit

    V6 6 Rail Power Supply Kit

    V6 - 6 rail super power supply kit for racking SSL and late model Neve modules. V6 can supply 3 x 1.5A positive power rails and 3 x 1.5A negative power rails. V6 has tracking and auto shutdown for each +/-V1 & +/-V2 pair of power rails. So +/- rails power up and shutdown together minimising thumps a…
    Heatsink 200mm x 75mm x 48mm (Required)
    Built and Tested (Required)
    This field is required.

    $97.90AUD inc GST for Australian Customers
    (Approx $58.82USD outside Australia)

    Stock Level8
    Info

    $97.90AUD inc GST for Australian Customers
    (Approx $58.82USD outside Australia)

    Info
    Stock Level8
    This field is required.
    Heatsink 200mm x 75mm x 48mm (Required)
    This field is required.
    Built and Tested (Required)
    This field is required.
  • IEC Fuse Switch

    IEC Fuse Switch

    IEC INLET with FUSE and POWER SWITCH in a snap in block. Unit is internally wired with only Active Neutral and Earth terminals on the rear of the block. For use with our Power Plant and World transformer kits etc  

    $15.40AUD inc GST for Australian Customers
    (Approx $9.25USD outside Australia)

    Stock Level10
    Info

    $15.40AUD inc GST for Australian Customers
    (Approx $9.25USD outside Australia)

    Info
    Stock Level10
  • 5v 2Amp Switch Mode Power Supply

    5v 2Amp Switch Mode Power Supply

    100vac to 250vac 5v 2A SMPS Plug pack used to run VUPPM Stereo Meter Compact & VUPPM Ver 3 kits when on board 5v to +/-12v SMPS fitted. Comes with snap-on world mains plugs for all countries.  
    Mains Plug Adaptor (Required)
    This field is required.

    $22.00AUD inc GST for Australian Customers
    (Approx $13.22USD outside Australia)

    Stock Level2
    Info

    $22.00AUD inc GST for Australian Customers
    (Approx $13.22USD outside Australia)

    Info
    Stock Level2
    This field is required.
    Mains Plug Adaptor (Required)
    This field is required.
  • 2.1mm DC Connector Isolated

    2.1mm DC Connector Isolated

     DC chassis connector that matches the output connector on our 12v & 48v SMPS. This connector does NOT join the 0v of the power supply to the chassis so can be used to make a +48v rail or +/-24v etc. Requires 8mm hole to mount.

    $2.20AUD inc GST for Australian Customers
    (Approx $1.32USD outside Australia)

    Stock Level201
    Info

    $2.20AUD inc GST for Australian Customers
    (Approx $1.32USD outside Australia)

    Info
    Stock Level201
  • KRAFTWERK Heatsink

    KRAFTWERK Heatsink

    Diecast Heatsink Machined & Tapped for M5 bolts for Kraftwork PCB. 150mm x 75mm x 38mm. Photo of Kraftwerk Power supply bolted to heatsink

    $49.50AUD inc GST for Australian Customers
    (Approx $29.74USD outside Australia)

    Stock Level8
    Info

    $49.50AUD inc GST for Australian Customers
    (Approx $29.74USD outside Australia)

    Info
    Stock Level8
  • KRAFTWERK KIT

    KRAFTWERK KIT

    KRAFTWERK 5 rail super power supply kit powers up to 2 x 11 way 500 racks or 2 x 51X racks loaded with 11 x 500 & 11 x 51X Modules. Kraftwerk has tracking and auto shutdown for each +/-V1 & +/-V2 pair of power rails. So +/- rails power up and shutdown together minimising thumps and pops in any audio…
    Heatsink 150mm x 75mm x 48mm (Required)
    This field is required.

    $86.90AUD inc GST for Australian Customers
    (Approx $52.21USD outside Australia)

    Stock Level8
    Info

    $86.90AUD inc GST for Australian Customers
    (Approx $52.21USD outside Australia)

    Info
    Stock Level8
    This field is required.
    Heatsink 150mm x 75mm x 48mm (Required)
    This field is required.
  • 2.1mm DC 2 Way Splitter Cable

    2.1mm DC 2 Way Splitter Cable

     Cable used to power 2 DC powered kits from one power supply

    $5.50AUD inc GST for Australian Customers
    (Approx $3.30USD outside Australia)

    Stock Level1
    Info

    $5.50AUD inc GST for Australian Customers
    (Approx $3.30USD outside Australia)

    Info
    Stock Level1
  • Power Plant 2 Rail Power Supply Kit

    Power Plant 2 Rail Power Supply Kit

    5.0 average, based on 1 reviews

    JLM Audio Power Plant kit. Full 115vac/230vac to +24vdc @ 600mA and +48vdc @ 100mA power supply for running 4 x Neve, Telefunken and RCA BA modules. Order with 2 x 12vac transformer for  +24vdc to +28vdc  for Neve, Telefunken etc Order with 2 x 15vac transformer for  +28vdc to +36vdc for RC…
    Built and Tested (Required)
    Power Transformer (Required)
    This field is required.

    $141.90AUD inc GST for Australian Customers
    (Approx $85.26USD outside Australia)

    Stock Level7
    Info

    $141.90AUD inc GST for Australian Customers
    (Approx $85.26USD outside Australia)

    Info
    Stock Level7
    This field is required.
    Built and Tested (Required)
    This field is required.
    Power Transformer (Required)
    This field is required.
  • 48v 15w 315mA Switch Mode Power Supply

    48v 15w 315mA Switch Mode Power Supply

    Tiny Internal 48v 15w 315mA SMPS. Runs on mains voltage of 85vac to 265vac without switching. Dimensions 62.5mm x 51mm x 28mm

    $38.50AUD inc GST for Australian Customers
    (Approx $23.13USD outside Australia)

    Stock Level90
    Info

    $38.50AUD inc GST for Australian Customers
    (Approx $23.13USD outside Australia)

    Info
    Stock Level90
  • 500 Series 5 Pin XLR Power Supply Kit

    500 Series 5 Pin XLR Power Supply Kit

    Use this kit with our powerstation kit to make a +/-16v @ 3Amp +48v @ 500mA power supply for API VPR 500 series racks. Has standard 500 series XLR pin out and 3 led indicators to show power rails are up and running. If more 5pin XLR outputs needed PS500XLR PCB can be connected together …

    $27.50AUD inc GST for Australian Customers
    (Approx $16.52USD outside Australia)

    Stock Level40
    Info

    $27.50AUD inc GST for Australian Customers
    (Approx $16.52USD outside Australia)

    Info
    Stock Level40
  • Bridge and Cap Kit

    Bridge and Cap Kit

    Bridge and CAP kit. Comes with 4 utilux terminals for connecting a 2 x 12VAC to 35VAC toroidal transformer. This feeds a on board 10A Bridge Rectifier and 4 x 10000uF 50v caps to make up to +/- 50v unreg with 20000uF of smoothing caps per rail. Daul screw output terminal allow star wiring to …

    $55.00AUD inc GST for Australian Customers
    (Approx $33.05USD outside Australia)

    Stock Level41
    Info

    $55.00AUD inc GST for Australian Customers
    (Approx $33.05USD outside Australia)

    Info
    Stock Level41
  • TREX2 Heatsink

    TREX2 Heatsink

    5Deg.C/W heatsink for TREX2

    $5.50AUD inc GST for Australian Customers
    (Approx $3.30USD outside Australia)

    Stock Level20
    Info

    $5.50AUD inc GST for Australian Customers
    (Approx $3.30USD outside Australia)

    Info
    Stock Level20
  • 48v 40w 840mA Switch Mode Power Supply

    48v 40w 840mA Switch Mode Power Supply

    NEW Large 48v 40w SMPS that is fully MEPS (Green energy rated) that can run on 80vac to 250vac without switching. Takes standard IEC power lead with 48v output on 2.1mm DC connector. Ideal for running 4 to 8 of our Baby Animal, BA4, mic pre kits. The 48v output is fairly smooth and noise free as …

    $75.90AUD inc GST for Australian Customers
    (Approx $45.60USD outside Australia)

    Stock Level38
    Info

    $75.90AUD inc GST for Australian Customers
    (Approx $45.60USD outside Australia)

    Info
    Stock Level38
  • 48v 25w 520mA Switch Mode Power Supply

    48v 25w 520mA Switch Mode Power Supply

    NEW 48v 520mA 25W SMPS that is fully MEPS (Green energy rated) that can run on 80vac to 250vac without switching. (Same physical size as our old 48v 380mA SMPS) Takes standard IEC power lead with 48v output on 2.1mm DC connector. Ideal for running all of our Baby Animal, BA2, Stereo Dual99v, Ste…

    $53.90AUD inc GST for Australian Customers
    (Approx $32.39USD outside Australia)

    Stock Level26
    Info

    $53.90AUD inc GST for Australian Customers
    (Approx $32.39USD outside Australia)

    Info
    Stock Level26
  • 12v 2A Switch Mode Power Supply

    12v 2A Switch Mode Power Supply

    100vac to 250vac 12v 1A SMPS Plug pack used to run VU buffer kits and VU lamps or LEDs. Comes with snap-on world mains plugs for all countries.

    $29.70AUD inc GST for Australian Customers
    (Approx $17.85USD outside Australia)

    Stock Level7
    Info

    $29.70AUD inc GST for Australian Customers
    (Approx $17.85USD outside Australia)

    Info
    Stock Level7
  • Power Switch Kit

    Power Switch Kit

    $20.90AUD inc GST for Australian Customers
    (Approx $12.56USD outside Australia)

    Stock Level15
    Info

    $20.90AUD inc GST for Australian Customers
    (Approx $12.56USD outside Australia)

    Info
    Stock Level15
  • 2.1mm DC Connector

    2.1mm DC Connector

    DC chassic connector that matches the output connector on our 48v 520mA SMPS. This connector joins the 0v of the power supply to the chassis as well so can only be used to make +48v rail. Requires 8mm hole to mount.

    $2.20AUD inc GST for Australian Customers
    (Approx $1.32USD outside Australia)

    Stock Level200
    Info

    $2.20AUD inc GST for Australian Customers
    (Approx $1.32USD outside Australia)

    Info
    Stock Level200
  • TREX2 2 Rail Power Supply Kit

    TREX2 2 Rail Power Supply Kit

    5.0 average, based on 1 reviews

    JLM TREX2 simple reg kit is a very simple Linear based universal power supply with can generate two 5v to 28v from a single 30v to 48vdc rail. It can do other output voltages by changing to different voltage zeners or if running from a regulated higher rail a trim pot can be used in place o…

    $38.50AUD inc GST for Australian Customers
    (Approx $23.13USD outside Australia)

    Stock Level10
    Info

    $38.50AUD inc GST for Australian Customers
    (Approx $23.13USD outside Australia)

    Info
    Stock Level10
  • TREX 1 Rail Power Supply Kit

    TREX 1 Rail Power Supply Kit

    5.0 average, based on 1 reviews

    JLM TREX simple reg kit is a very simple Linear based universal power supply with can generate a 5v to 28v from a single 30v to 48vdc rail. It can do other output voltages by changing to different voltage zeners or if running from a regulated higher rail a trim pot can be used in place o…

    $22.00AUD inc GST for Australian Customers
    (Approx $13.22USD outside Australia)

    Stock Level11
    Info

    $22.00AUD inc GST for Australian Customers
    (Approx $13.22USD outside Australia)

    Info
    Stock Level11
  • World Transformer Kit

    World Transformer Kit

    JLM World Power kit is a fully fused & 120v/240VAC switchable 30VA PCB power transformer to dual low voltage AC out. Kit can be ordered with 3 different transformers with either 2 x 9vac or 2 x 12vac or 2 x 15vac outputs. This kit with either a AC/DC or Powerstation kit will give you a full …
    Power Transformer (Required)
    This field is required.

    $97.90AUD inc GST for Australian Customers
    (Approx $58.82USD outside Australia)

    Stock Level6
    Info

    $97.90AUD inc GST for Australian Customers
    (Approx $58.82USD outside Australia)

    Info
    Stock Level6
    This field is required.
    Power Transformer (Required)
    This field is required.
  • Powerstation 5 Rail Power Supply Kit

    Powerstation 5 Rail Power Supply Kit

    JLM PowerStation Ver. 3 kit is a Linear based universal power supply which can generate 5 voltage rails from a single or dual 15 to 30vac power transformer.   It has one pump charge rail for 48vdc, 2 +/- Rails that can be set from +/-2v to 37v by a 25turn trim pot. All regulators are on on…
    10 Amp Bridge Rectifier (Required)
    This field is required.

    $64.90AUD inc GST for Australian Customers
    (Approx $39.00USD outside Australia)

    Stock Level4
    Info

    $64.90AUD inc GST for Australian Customers
    (Approx $39.00USD outside Australia)

    Info
    Stock Level4
    This field is required.
    10 Amp Bridge Rectifier (Required)
    This field is required.
  • AC/DC 3 Rail Power Supply Kit

    AC/DC 3 Rail Power Supply Kit

    JLM AC/DC Ver. 4 kit is a Linear based universal power supply that generates 3 voltage rails from a single or dual 15 to 30vac power transformer. It has one pump charge rail for 48vdc, 1 +/- Rails that can be set from +/-2v to 37v by a 25turn trim pot. All regulators are on one edge for easy …

    $53.90AUD inc GST for Australian Customers
    (Approx $32.39USD outside Australia)

    Stock Level9
    Info

    $53.90AUD inc GST for Australian Customers
    (Approx $32.39USD outside Australia)

    Info
    Stock Level9
6
Top

 

© 2001-2024. All rights reserved.