Time at JLM Shop:

Opamps

This field is required.
  • 4136 to TL074 Adaptor

    4136 to TL074 Adaptor

    Socket adaptor for replacing 4136 quad opamps with modern quad DIP14 opamps like TL074 or OPA4134 etc. Good for upgrading LA4 compressors or Carver C1 hifi preamps or any device that uses 4136 opamps.

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level22

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level22
  • DOA Solder to Sockets adaptor

    DOA Solder to Sockets adaptor

    Socket adaptor for replacing soldered-in Yamaha NE80100 & NE80200 opamps with 2520 / 990 socket footprint so opamps can be plugged in and swapped easily. The PCB Pads and holes in the old Yamaha PCBs are too small to be drilled out for the sockets. This adaptor makes it easy as it can solder in w…

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level5

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level5
  • TA7136 to 990/2520 DOA adaptor

    TA7136 to 990/2520 DOA adaptor

    Socket adaptor for replacing 7 pin SIL TA7136 opamps with 2520 / 990 footprint type DOA  The adaptor can have SIL pins mounted offset by 7.5mm (0.3") left or right to help it fit in tight spaces. TA7136 are used in many old Yamaha PM2000, M1516, M1524, M1532 etc consoles.

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level30

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level30
  • HA1457 to 990/2520 DOA adaptor

    HA1457 to 990/2520 DOA adaptor

    Socket adaptor for replacing 8 pin SIL HA1457 opamps with 2520 / 990 footprint type DOA The adaptor can have SIL pins mounted offset by 7.5mm (0.3") left or right to help it fit in tight spaces.  HA1457 are used in many old Yamaha PM2000, M1516, M1524, M1532 etc consoles.

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level30

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level30
  • TA7322 to 990/2520 DOA adaptor

    TA7322 to 990/2520 DOA adaptor

    Socket adaptor for replacing 9 pin SIL TA7322 opamps with 2520 / 990 footprint type DOA  The adaptor can have SIL pins mounted offset by 7.5mm (0.3") left or right to help it fit in tight spaces. TA7322 are used in many old Yamaha PM2000, M1516, M1524, M1532 etc consoles.

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level30

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level30
  • DIP8 to 2520/990 Adaptor

    DIP8 to 2520/990 Adaptor

    Socket adaptor for replacing Single DIP8 opamps with 2520 / 990 type DOA footprint  

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level25

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level25
  • 990A+ opamp

    990A+ opamp

    5.0 average, based on 1 reviews

    Our modern version on the Deane Jensen 990 opamp. Due to our improved dual constant currents tracking more than 10 times better than the original, the C upgrade for wide voltage range is not needed so the design is closer to the original 990 version but can run on even wider voltage range. We have a…

    $73.15AUD inc GST for Australian Customers
    (Approx $46.86USD outside Australia)

    Stock Level37
    990A+ opamp

    990A+ opamp

    5.0 average, based on 1 reviews

    $73.15AUD inc GST for Australian Customers
    (Approx $46.86USD outside Australia)

    Stock Level37
  • Hybrid SMDv2 Opamp

    Hybrid SMDv2 Opamp

    The JLM Hybrid SMDv2 is a fet input IC opamp with high current output drive transistors. It can have the output transistors set to run in Class A/B or Class A Mode that can be enabled by soldering two solder pads together on top of the PCB. It is pin-compatible with the JLM99v, 990, 992, 993, MM99…

    $53.90AUD inc GST for Australian Customers
    (Approx $34.53USD outside Australia)

    Stock Level18

    $53.90AUD inc GST for Australian Customers
    (Approx $34.53USD outside Australia)

    Stock Level18
  • Twenty 5 Twenty SMD Opamp

    Twenty 5 Twenty SMD Opamp

    5.0 average, based on 3 reviews

    Twenty 5 Twenty SMD opamp is an amazing sounding extreme precision version of the old original 2520 opamp.  Voltage range of +/-12v to +/-25v. Precision 1% matched input transistor diff pair Precision 1% matched second stage transistor diff pair. Improved thermal layout for least DC off…

    $49.50AUD inc GST for Australian Customers
    (Approx $31.71USD outside Australia)

    Stock Level177

    $49.50AUD inc GST for Australian Customers
    (Approx $31.71USD outside Australia)

    Stock Level177
  • FLICK535 SMD Opamp

    FLICK535 SMD Opamp

    Our modern take on the FLICKinger opamp with standard discrete 990 2520 pinout but now in SMD Power +/-15vdc to +/-28vdc (Below +/-24vdc THD increases slowly to 0.06% @ +/15vdc) Draws 10mA to 20mA @ idle   H1 { TEXT-ALIGN: center } H2 { FONT-SIZE: 14pt } H3 {FONT-FAMILY: Verdana,Ari…

    $53.90AUD inc GST for Australian Customers
    (Approx $34.53USD outside Australia)

    Stock Level35

    $53.90AUD inc GST for Australian Customers
    (Approx $34.53USD outside Australia)

    Stock Level35
  • TA7136 SMD Opamp replacement

    TA7136 SMD Opamp replacement

    TA7136 SMD replacement opamp can replace old TA7136 SIL opamps used in many old Yamaha consoles.   Uses dual opamp as one opamp so can drive 300ohm loads and run on +/-18vdc max. Improves performance especially in summing amp positons. Parts list SMD Adaptor PCB 7 gold pin strip …

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level24

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level24
  • HS3099 Opamp

    HS3099 Opamp

    HS3099 opamp is a modern version of the Sontec HS2000 & HS2030 in a 2520 / 990 footprint but with several improvements for longer reliable life without tonal changes. Voltage range +/-24vdc or +/-28vdc @ 40mA no load. Frequency range DC to 10MHz. Hand matched devices. Improved constant …
    Servo pin will be used via 51k? (Required)
    Voltage (Required)
    This field is required.

    $192.50AUD inc GST for Australian Customers
    (Approx $123.32USD outside Australia)

    Stock Level16

    $192.50AUD inc GST for Australian Customers
    (Approx $123.32USD outside Australia)

    Stock Level16
    This field is required.
    Servo pin will be used via 51k? (Required)
    This field is required.
    Voltage (Required)
    This field is required.
  • NE5533 to 2xNE5534A Adaptor

    NE5533 to 2xNE5534A Adaptor

    Socket adaptor for replacing NE5533 dual opamps with two modern single DIP8 opamps like NE5534AP etc.  

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level45

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level45
  • HS7000 Opamp

    HS7000 Opamp

    HS7000 opamp is a modern version of the Sontec HS6000 but with several improvements for longer reliable life without tonal changes. The HS7000 can also replace HS6000 and also 990 / 2520 foot print opamps in Sontec clones and other equipment. When ordering let us know if you want them as Sont…
    Pinout type (Required)
    This field is required.

    $104.50AUD inc GST for Australian Customers
    (Approx $66.94USD outside Australia)

    Stock Level60

    $104.50AUD inc GST for Australian Customers
    (Approx $66.94USD outside Australia)

    Stock Level60
    This field is required.
    Pinout type (Required)
    This field is required.
  • ITI to Sontec Filter

    ITI to Sontec Filter

    Plug in Sontec Filter to replace old ITI EQs filter pcb with potted rectangle filter opamps. Replaces broken ITI Filter modules with Sontec type filter.  The ITI to Sontec Filter replaces the below type ITI filter modules.  

    $77.00AUD inc GST for Australian Customers
    (Approx $49.33USD outside Australia)

    Stock Level6

    $77.00AUD inc GST for Australian Customers
    (Approx $49.33USD outside Australia)

    Stock Level6
  • ITI Filter Adaptor

    ITI Filter Adaptor

    Plug in adaptor to replace old ITI EQs filter pcb with potted rectangle filter opamps. Allows discrete opamps like JLM99v, JLM 25HV, JLM35HVFET, FLICK535, HYBRID etc to plug in and run on +/-24v or +/-28v power rails. The ITI filter adaptor replaces the below type ITI filter modules. …

    $55.00AUD inc GST for Australian Customers
    (Approx $35.23USD outside Australia)

    Stock Level3

    $55.00AUD inc GST for Australian Customers
    (Approx $35.23USD outside Australia)

    Stock Level3
  • ITI Opamp Adaptor

    ITI Opamp Adaptor

    Plug in adaptor to replace old ITI EQs amp pcb with 3 potted rectangle opamps. Allows discrete opamps like JLM99v, JLM 25HV, JLM35HVFET, FLICK535 etc to plug in and run on the +/-28v power rails. The ITI Amp adaptor replaces the below type ITI audio path modules.

    $99.00AUD inc GST for Australian Customers
    (Approx $63.42USD outside Australia)

    Stock Level10

    $99.00AUD inc GST for Australian Customers
    (Approx $63.42USD outside Australia)

    Stock Level10
  • HS3030 Opamp

    HS3030 Opamp

    HS3030 opamp is a modern version of the Sontec HS2030 but with several improvements for longer reliable life without tonal changes. The HS3030 can also replace HS2000 with a quick desolder of a solder link. If using as HS2000 leave note in comments so we will setup the opamp before shipping. …

    $192.50AUD inc GST for Australian Customers
    (Approx $123.32USD outside Australia)

    Stock Level6

    $192.50AUD inc GST for Australian Customers
    (Approx $123.32USD outside Australia)

    Stock Level6
  • DUAL to 2xSINGLE DIP8 Adaptor

    DUAL to 2xSINGLE DIP8 Adaptor

    Socket adaptor for replacing DUAL DIP8 opamps with two modern single DIP8 opamps like OPA604AP or NE5534AP etc.  

    $19.80AUD inc GST for Australian Customers
    (Approx $12.68USD outside Australia)

    Stock Level5

    $19.80AUD inc GST for Australian Customers
    (Approx $12.68USD outside Australia)

    Stock Level5
  • TL074 to 2xDual DIP8 Adaptor

    TL074 to 2xDual DIP8 Adaptor

    Socket adaptor for replacing TL074 quad opamps with two modern dual DIP8 opamps like OPA2604AP or NE5532AP etc.  

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level2

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level2
  • 6 x 1mm gold opamp pins

    6 x 1mm gold opamp pins

    6  x 1mm pins for Hybrid discrete opamps. 

    $2.20AUD inc GST for Australian Customers
    (Approx $1.41USD outside Australia)

    Stock Level169

    $2.20AUD inc GST for Australian Customers
    (Approx $1.41USD outside Australia)

    Stock Level169
  • TA7322P & HA1457 replacement opamp kit

    TA7322P & HA1457 replacement opamp kit

    5.0 average, based on 1 reviews

    TA7322P & HA1457 replacement opamp kit v2 can replace old TA7322P & HA1457 SIL opamps used in many old Yamaha PM2000, M1516, M1524, M1532 etc consoles.   Uses dual NE5532AP as one opamp so can drive 300ohm loads and run on +/-25vdc max. Improves performance, especially in summing amp position…

    $27.50AUD inc GST for Australian Customers
    (Approx $17.62USD outside Australia)

    Stock Level12

    $27.50AUD inc GST for Australian Customers
    (Approx $17.62USD outside Australia)

    Stock Level12
  • BAX83AM Module

    BAX83AM Module

      Compact version of the Neve BA183AM or BA283AM output amp section as used in our Micro1290 and Macro1290 kits  

    $49.50AUD inc GST for Australian Customers
    (Approx $34.88USD outside Australia)

    Stock Level6

    $49.50AUD inc GST for Australian Customers
    (Approx $34.88USD outside Australia)

    Stock Level6
  • BAX83NV Module

    BAX83NV Module

    Compact version of the Neve BA183NV or BA283NV preamp section as used in our Micro1290 and Macro1290 kits 

    $54.45AUD inc GST for Australian Customers
    (Approx $34.88USD outside Australia)

    Stock Level12

    $54.45AUD inc GST for Australian Customers
    (Approx $34.88USD outside Australia)

    Stock Level12
  • Sontec HS10** SMD Opamp Adaptor

    Sontec HS10** SMD Opamp Adaptor

    Plug in adaptor for old Sontecs EQs or Comps with potted rectangle opamps like HS1000, HS1020 and HS1050. Allows discrete opamps like JLM99v, HYBRID SMDv2, FLICK SMD, 990, 992, 993 etc to plug in and run on either +/-28v or +/-24v by soldering or unsoldering 4 solder pads.   Solder link p…

    $33.00AUD inc GST for Australian Customers
    (Approx $21.14USD outside Australia)

    Stock Level19

    $33.00AUD inc GST for Australian Customers
    (Approx $21.14USD outside Australia)

    Stock Level19
  • V8 Opamp Kit

    V8 Opamp Kit

    JLM V8 opamp kit uses 4 x dual standard opamps like NE5532AP, OPA2604AP, TL072, LM833, OPA2134 to make a brut powerful hard load driving opamp with low THD. All 8 opamp outputs share the load. Pinout is standard 99v, 2520, 990, 992, 993. 4 x NE5532AP can drive 60ohm load on +/-12v to +/-18…
    Opamps (Required)
    This field is required.

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level3

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level3
    This field is required.
    Opamps (Required)
    This field is required.
  • NE5532AP Dual Opamp

    $5.50AUD inc GST for Australian Customers
    (Approx $3.52USD outside Australia)

    Stock Level133

    $5.50AUD inc GST for Australian Customers
    (Approx $3.52USD outside Australia)

    Stock Level133
  • 6 x 1mm Sockets

    6 x 1mm Sockets

    6  x 1mm sockets for all of our BA, BAD, BAN PCB's. Sockets fit in 1.83mm hole on PCB and allow for plugging in 99v, Hybrid discrete opamps. 

    $6.60AUD inc GST for Australian Customers
    (Approx $4.23USD outside Australia)

    Stock Level24

    $6.60AUD inc GST for Australian Customers
    (Approx $4.23USD outside Australia)

    Stock Level24
  • Hybrid Opamp Kit

    Hybrid Opamp Kit

    We are selling the hybrid kit without opamps at the moment due to OPA2604AP being unavailable while TI try to fix the overheating problem since they moved the opamp onto a new smaller silicon fab. You can run any dual fet input opamp on there up to the max voltage of the opamp used. Opamps like TL07…
    Opamp (Required)
    This field is required.

    $31.90AUD inc GST for Australian Customers
    (Approx $20.44USD outside Australia)

    Stock Level0
    Out of stock

    $31.90AUD inc GST for Australian Customers
    (Approx $20.44USD outside Australia)

    Stock Level0
    Out of stock
    This field is required.
    Opamp (Required)
    This field is required.
  • 4136 to 2xDual DIP8 Adaptor

    4136 to 2xDual DIP8 Adaptor

    Socket adaptor for replacing 4136 quad opamps with two modern dual DIP8 opamps like OPA2604AP or NE5532AP etc. Good for upgrading LA4 compressors or Carver C1 hifi preamps or any device that uses 4136 opamps. Black LA4 needs 2 x 4136 adaptor and replace round output opamp with DIP8 wirewrap s…

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level4

    $22.00AUD inc GST for Australian Customers
    (Approx $14.09USD outside Australia)

    Stock Level4
  • JLM99v Opamp +/-16v to +/-24v

    JLM99v Opamp +/-16v to +/-24v

    JLM99V opamp +/-16v is our JLM99v rebiased for lower voltage power rails like used in our 500 series equipment. It is a pure path device with the signal path only travelling through three transistor junctions. It has gain limited to about 60dB with no feedback applied. When setup right the THD with…

    $82.50AUD inc GST for Australian Customers
    (Approx $52.85USD outside Australia)

    Stock Level42

    $82.50AUD inc GST for Australian Customers
    (Approx $52.85USD outside Australia)

    Stock Level42
  • JLM99v Opamp +/-24v to +/-34v

    JLM99v Opamp +/-24v to +/-34v

    JLM99V opamp is like a Neve Class A Preamp on major Steroids. It is a pure path device with the signal path only travelling through three transistor junctions. It has gain limited to about 60dB with no feedback applied. When setup right the THD with feedback is 0.005% at normal operating levels head…

    $82.50AUD inc GST for Australian Customers
    (Approx $52.85USD outside Australia)

    Stock Level26

    $82.50AUD inc GST for Australian Customers
    (Approx $52.85USD outside Australia)

    Stock Level26
17
Top

 

© 2001-2024. All rights reserved.