Time at JLM Shop:

VU2 Stereo VU Buffer Kit

VU2 Stereo VU Buffer Kit
  • Click to enlarge
Input Connector Type (Required)

5.0 average, based on 1 reviews

$55.00AUD inc GST for Australian Customers
(Approx $33.01USD outside Australia)
Change currency to see all prices including options in your preferred currency.

Product Information
Stock Level14

VU2 KIT is a stereo version of the normal VU buffer  but with some added features.

  • Several PCB input options like 2 x XLR or 2 x TRS jacks or JLM Stereo port 10pin IDC or 3 way mini terminal blocks with pre wired plugs.
  • PCB can be mounted by the PCB XLRs or TRS jacks or 2 x 3mm bolts.
  • Trim pot can be standing on top or sideways under PCB.
  • PCB has 2 x RLAMP resistors for series resistors for led backlight or soft starting lamps.
  • Power from single (+12v to +36v) or split (+/-6v to +/-18v) power rails.
  • PCB 50.8mm (2") x 50.8mm (2").

Parts list here

Build Thread here

 

Customer Reviews

Average Rating: 5

Great kit

12345
I'm using JLM's stereo VU buffer kit, and two of the 35 mm VU meters, as part of a stereo receiver project that I'm currently re-building. The kit was pretty easy to put together and I'm a novice. The pictures and description in the build thread are accurate. I took my time, and it took me about 2 hours for assembly of the PCB and initial testing. For power I'm using a 24V DC switching power supply, which also powers the main amplifier in the receiver. The inputs for the L/R channels on the VU buffer board are coming off of the source selector switch in the receiver. Worked like a charm the first time I fired it up. Highly recommended! (Tue Feb 12 2013, 03:03 am )

Write Review

Anti-Spam Test
Please enter a valid email address.
This field is required.
Top

 

© 2001-2024. All rights reserved.