Time at JLM Shop:

Mic Pre Kits

This field is required.
  • NV500 Mic Pre kit

    NV500 Mic Pre kit

    NV500 Mic Pre Kit The NV500 is our take on the classic Neve 1073/1290 Mic Pre but heavily reworked to give you much more. Firstly the input impedance is fully variable between 200ohm and 1200ohm instead of switched which gives you great tone/speed control to help balance the mic pre tone without …

    $548.90AUD inc GST for Australian Customers
    (Approx $335.17USD outside Australia)

    Stock Level8

    $548.90AUD inc GST for Australian Customers
    (Approx $335.17USD outside Australia)

    Stock Level8
  • GAIN Mic Pre / Makeup Amp Kit

    GAIN Mic Pre / Makeup Amp Kit

    GAIN is a gain block that with an input transformer can be used as a mic pre or unbalanced in as a makeup amp. It only needs a 48vdc power rail to run. From this, it supplies the opamp with +/-12vdc to +/-24vdc set by a trimpot, as well as supplying 48v for phantom power. Opamp voltage is set by…
    Opamp sockets (Required)
    Opamp (Required)
    Output Transformer (Required)
    Power Supply (Required)
    This field is required.

    $49.50AUD inc GST for Australian Customers
    (Approx $30.23USD outside Australia)

    Stock Level24

    $49.50AUD inc GST for Australian Customers
    (Approx $30.23USD outside Australia)

    Stock Level24
    This field is required.
    Opamp sockets (Required)
    This field is required.
    Opamp (Required)
    This field is required.
    Output Transformer (Required)
    This field is required.
    Power Supply (Required)
    This field is required.
  • Dual99v3000 Mic Pre kit

    Dual99v3000 Mic Pre kit

    Dual99v3000 Ver2 mic pre kit version made for retro fit into Sony / MCI MXP3000 consoles uses 2 of our discrete 99v opamps (New +/-16v version) as a 2 stage gain path to provide 66dB of gain with ease. It is aimed at getting big but realistic vocals and acoustic instruments. Kit comes complete with…
    Dual Gain range mod kit
    Input Transformer (Required)
    1. Opamp (Required)
    2. Opamp (Required)
    This field is required.

    $110.00AUD inc GST for Australian Customers
    (Approx $67.17USD outside Australia)

    Stock Level7

    $110.00AUD inc GST for Australian Customers
    (Approx $67.17USD outside Australia)

    Stock Level7
    This field is required.
    Dual Gain range mod kit
    This field is required.
    Input Transformer (Required)
    This field is required.
    1. Opamp (Required)
    This field is required.
    2. Opamp (Required)
    This field is required.
  • Talkback Compressor kit

    Talkback Compressor kit

    Compact and powerful talkback mic pre fet compressor. Can be used as simple balanced in THAT1510 mic pre with balanced out with comp disabled. Neutrik Gold XLR in and out on PCB Talkback switch terminals Comp on/off threshold terminals 10 pin Amp Head plug THAT1510 mic pre  NE5532A …

    $66.00AUD inc GST for Australian Customers
    (Approx $40.30USD outside Australia)

    Stock Level1

    $66.00AUD inc GST for Australian Customers
    (Approx $40.30USD outside Australia)

    Stock Level1
  • REPRO passive reamp kit

    REPRO passive reamp kit

    REPRO passive reamp kit. Perfect for converting balanced line out level down to unbalanced guitar level with full volume and tone impedance adjustment. REPRO Build Thread click here REPRO reamp kit parts list 1 x Hammond black plastic box 1 x REPRO front panel 1 x JLM14 transformer 1 x Pl…

    $149.60AUD inc GST for Australian Customers
    (Approx $91.35USD outside Australia)

    Stock Level9

    $149.60AUD inc GST for Australian Customers
    (Approx $91.35USD outside Australia)

    Stock Level9
  • BA500 Ver2 Mic Pre Kit

    BA500 Ver2 Mic Pre Kit

    5.0 average, based on 1 reviews

    BA500 Ver2 mic pre kit comes complete with every part down to the last nut and bolt. You only need to pick the options for Input and output transformers, Opamp and DI input when ordering. Now with 2 BA500 pcb options. Standard BA500v2 PCB takes large JLM111PCB output transformer or NEW BA500v2503…
    Input Transformer (Required)
    DI Kit (Required)
    Opamp (Required)
    Output Transformer (Required)
    This field is required.

    $218.90AUD inc GST for Australian Customers
    (Approx $133.67USD outside Australia)

    Stock Level6
    BA500 Ver2 Mic Pre Kit

    BA500 Ver2 Mic Pre Kit

    5.0 average, based on 1 reviews

    $218.90AUD inc GST for Australian Customers
    (Approx $133.67USD outside Australia)

    Stock Level6
    This field is required.
    Input Transformer (Required)
    This field is required.
    DI Kit (Required)
    This field is required.
    Opamp (Required)
    This field is required.
    Output Transformer (Required)
    This field is required.
  • JLM99MBv2 Mic Pre Kit

    JLM99MBv2 Mic Pre Kit

    The JLM99MBv2 PCB for the JLM99V which can take several transformers from manufacturers like OEP, Lundahl & Jensen. The board also has NE5534A DIP8 sockets so it can be fully tested with cheap IC's before installing the 99V. The PCB can be used for building the simplest NE5534A, OPA604A or 99V, 990,…
    Input Transformer (Required)
    1. Opamp (Required)
    2. Opamp (Required)
    Output Transformer (Required)
    Power Supply (Required)
    This field is required.

    $104.50AUD inc GST for Australian Customers
    (Approx $63.81USD outside Australia)

    Stock Level28

    $104.50AUD inc GST for Australian Customers
    (Approx $63.81USD outside Australia)

    Stock Level28
    This field is required.
    Input Transformer (Required)
    This field is required.
    1. Opamp (Required)
    This field is required.
    2. Opamp (Required)
    This field is required.
    Output Transformer (Required)
    This field is required.
    Power Supply (Required)
    This field is required.
  • BAN Transformerless Pure Mic Pre Kit

    BAN Transformerless Pure Mic Pre Kit

    The Baby Animal Neutral super clean wire with gain 60dB single channel mic pre kit based on the Graham Cohen (National Semiconductor Designer) mic pre used in various forms by SSL, Neve Mozart, Amek 9098, Fred Forsell but made to work on a single 48v power rail.The mic pre has 20k input impedance w…
    Impedence Pot (Required)
    Opamp (Required)
    Output Transformer (Required)
    This field is required.

    $97.90AUD inc GST for Australian Customers
    (Approx $59.78USD outside Australia)

    Stock Level10

    $97.90AUD inc GST for Australian Customers
    (Approx $59.78USD outside Australia)

    Stock Level10
    This field is required.
    Impedence Pot (Required)
    This field is required.
    Opamp (Required)
    This field is required.
    Output Transformer (Required)
    This field is required.
  • MONO Ver3 Compact Mic Pre Kit

    MONO Ver3 Compact Mic Pre Kit

    The MONO mic pre is a compact tough transformer balanced input mic pre with variable impedance and electronic balanced output which can run on 2 x 9v Normal Alkaline or Rechargable NiMH batteries and provide 18v phantom power which will run most modern condensor microphones or you can use our 48v 52…
    Input Transformer (Required)
    2 x 9v NiMH Batteries (Required)
    Opamp (Required)
    Power Supply (Required)
    This field is required.

    $165.00AUD inc GST for Australian Customers
    (Approx $100.75USD outside Australia)

    Stock Level5

    $165.00AUD inc GST for Australian Customers
    (Approx $100.75USD outside Australia)

    Stock Level5
    This field is required.
    Input Transformer (Required)
    This field is required.
    2 x 9v NiMH Batteries (Required)
    This field is required.
    Opamp (Required)
    This field is required.
    Power Supply (Required)
    This field is required.
  • 1272 to 1290 Module

    1272 to 1290 Module

    The JLM1272 to 1290 module is a prebuilt and tested module that has all switching and extra BA*183NV preamp satage to turn a Neve 1272 Line amp into a full Neve 1290 (1073 Mic pre) quickly and easily. New Version of 1272 to 1290 Module. Redesigned to use our compact. 2 x 12 rotary switch to fit s…

    $163.90AUD inc GST for Australian Customers
    (Approx $100.08USD outside Australia)

    Stock Level8

    $163.90AUD inc GST for Australian Customers
    (Approx $100.08USD outside Australia)

    Stock Level8
  • 1290 Macro Mic Pre Kit

    1290 Macro Mic Pre Kit

    NEW 1290 Macro kit is the quickest and most compact way to build a 1290/1073 mic pre. Only need to solder 36 parts to motherboard PCB. BAX83NV & BAX83AM modules fully built and tested. BAX83AM trim pot preset for Neve LO1166 & JLM111DC output transformer. Will work with original Neve Marinair trans…
    Input Transformer (Required)
    DI Kit (Required)
    Input Switching (Required)
    Output Transformer (Required)
    Power Supply (Required)
    This field is required.

    $218.90AUD inc GST for Australian Customers
    (Approx $133.67USD outside Australia)

    Stock Level0
    Out of stock

    $218.90AUD inc GST for Australian Customers
    (Approx $133.67USD outside Australia)

    Stock Level0
    Out of stock
    This field is required.
    Input Transformer (Required)
    This field is required.
    DI Kit (Required)
    This field is required.
    Input Switching (Required)
    This field is required.
    Output Transformer (Required)
    This field is required.
    Power Supply (Required)
    This field is required.
  • BAD High Gain Mic Pre Kit

    BAD High Gain Mic Pre Kit

    5.0 average, based on 2 reviews

    The Baby Animal Dual 75dB high gain single channel mic pre kit is a classic old school transformer dual opamp stage mic pre which only needs a single 48v power rail to run on. It is also one our popular kit due to its ease to build and great range of useful warm tones mixed with high gain make it…
    Impedence Pot (Required)
    Input Transformer (Required)
    1. Opamp (Required)
    2. Opamp (Required)
    DI Kit (Required)
    Output Transformer (Required)
    Power Supply (Required)
    This field is required.

    $108.90AUD inc GST for Australian Customers
    (Approx $66.50USD outside Australia)

    Stock Level25

    $108.90AUD inc GST for Australian Customers
    (Approx $66.50USD outside Australia)

    Stock Level25
    This field is required.
    Impedence Pot (Required)
    This field is required.
    Input Transformer (Required)
    This field is required.
    1. Opamp (Required)
    This field is required.
    2. Opamp (Required)
    This field is required.
    DI Kit (Required)
    This field is required.
    Output Transformer (Required)
    This field is required.
    Power Supply (Required)
    This field is required.
  • 1290 2 Channel Mic Pre Complete Rack Kit

    1290 2 Channel Mic Pre Complete Rack Kit

    5.0 average, based on 1 reviews

    Updated 12902 channel mic pre rack kit. Each channel is our take on the Famous Neve 1073 mic pre  with 2 preamp gain stage and output amp module to provide 75dB of gain with ease.  Updates As quick and easy to build as our Baby Animal kits as this kit is built on the GIo Between PL…

    $1,318.90AUD inc GST for Australian Customers
    (Approx $805.36USD outside Australia)

    Stock Level0
    Out of stock

    $1,318.90AUD inc GST for Australian Customers
    (Approx $805.36USD outside Australia)

    Stock Level0
    Out of stock
  • Dual99v 2 Channel Mic Pre Complete Rack Kit

    Dual99v 2 Channel Mic Pre Complete Rack Kit

    5.0 average, based on 1 reviews

    Updated Dual99v 2 channel mic pre rack kit. Each channel uses 2 of our discrete 99v opamps as a 2 stage gain path to provide 75dB of gain with ease. It is aimed at recording big fat sounding but realistic vocals and acoustic instruments. Updates Now has the impedance control like our 500…

    $1,318.90AUD inc GST for Australian Customers
    (Approx $805.36USD outside Australia)

    Stock Level2

    $1,318.90AUD inc GST for Australian Customers
    (Approx $805.36USD outside Australia)

    Stock Level2
  • BA4 4 Channel Mic Pre Complete Rack Kit

    BA4 4 Channel Mic Pre Complete Rack Kit

    4.0 average, based on 1 reviews

    Updated BA4 4 channel mic pre rack kit. Comes with any combo of 4 of our BA or BAN kit with options picked below to build lots great sounding different mic pres. BA4 kit comes with 48v external power supply and everything down to the wiring and last nut and bolt and full rack case with lasere…
    1. DI (Required)
    1. Input Transformer (Required)
    1. Opamp (Required)
    1. Output Transformer (Required)
    2. DI (Required)
    2. Input Transformer (Required)
    2. Opamp (Required)
    2. Output Transformer (Required)
    3. DI (Required)
    3. Input Transformer (Required)
    3. Opamp (Required)
    3. Output Transformer (Required)
    4. DI (Required)
    4. Input Transformer (Required)
    4. Opamp (Required)
    4. Output Transformer (Required)
    This field is required.

    $768.90AUD inc GST for Australian Customers
    (Approx $469.51USD outside Australia)

    Stock Level4

    $768.90AUD inc GST for Australian Customers
    (Approx $469.51USD outside Australia)

    Stock Level4
    This field is required.
    1. DI (Required)
    This field is required.
    1. Input Transformer (Required)
    This field is required.
    1. Opamp (Required)
    This field is required.
    1. Output Transformer (Required)
    This field is required.
    2. DI (Required)
    This field is required.
    2. Input Transformer (Required)
    This field is required.
    2. Opamp (Required)
    This field is required.
    2. Output Transformer (Required)
    This field is required.
    3. DI (Required)
    This field is required.
    3. Input Transformer (Required)
    This field is required.
    3. Opamp (Required)
    This field is required.
    3. Output Transformer (Required)
    This field is required.
    4. DI (Required)
    This field is required.
    4. Input Transformer (Required)
    This field is required.
    4. Opamp (Required)
    This field is required.
    4. Output Transformer (Required)
    This field is required.
  • BA2 2 Channel Mic Pre Complete Rack Kit

    BA2 2 Channel Mic Pre Complete Rack Kit

    Product Information   Updated BA2 2 channel mic pre rack kit. Each channel can use 1 discrete opamp as a 1 stage gain path to provide 60dB of gain. The most popular BA2 configurations are JLM14 input transformer + JLM99v opamp for big smooth fat and clean sounding. The 2nd most popular is V…
    1. DI (Required)
    1. Input Transformer (Required)
    1. Opamp (Required)
    1. Output Transformer (Required)
    2. DI (Required)
    2. Input Transformer (Required)
    2. Opamp (Required)
    2. Output Transformer (Required)
    This field is required.

    $658.90AUD inc GST for Australian Customers
    (Approx $402.34USD outside Australia)

    Stock Level2

    $658.90AUD inc GST for Australian Customers
    (Approx $402.34USD outside Australia)

    Stock Level2
    This field is required.
    1. DI (Required)
    This field is required.
    1. Input Transformer (Required)
    This field is required.
    1. Opamp (Required)
    This field is required.
    1. Output Transformer (Required)
    This field is required.
    2. DI (Required)
    This field is required.
    2. Input Transformer (Required)
    This field is required.
    2. Opamp (Required)
    This field is required.
    2. Output Transformer (Required)
    This field is required.
  • BA Transformer Mic Pre Kit

    BA Transformer Mic Pre Kit

    5.0 average, based on 2 reviews

    The Baby Animal 60dB single channel mic pre kit is a classic old school transformer single opamp stage mic pre only needing a single 48v power rail to run on. It is by far our most popular kit having due to its ease to build and great range of useful warm tones. The PCB can take several input tr…
    Impedence Pot (Required)
    Input Transformer (Required)
    DI Kit (Required)
    Opamp (Required)
    Output Transformer (Required)
    Power Supply (Required)
    This field is required.

    $86.90AUD inc GST for Australian Customers
    (Approx $53.06USD outside Australia)

    Stock Level5

    $86.90AUD inc GST for Australian Customers
    (Approx $53.06USD outside Australia)

    Stock Level5
    This field is required.
    Impedence Pot (Required)
    This field is required.
    Input Transformer (Required)
    This field is required.
    DI Kit (Required)
    This field is required.
    Opamp (Required)
    This field is required.
    Output Transformer (Required)
    This field is required.
    Power Supply (Required)
    This field is required.
4
Top

 

© 2001-2024. All rights reserved.