Time at JLM Shop:

KRAFTWERK KIT

KRAFTWERK KIT
  • Click to enlarge
Heatsink 150mm x 75mm x 48mm (Required)

$86.90AUD inc GST for Australian Customers
(Approx $53.02USD outside Australia)
Change currency to see all prices including options in your preferred currency.

(Quantity discounts available)


Product Information
Quantity Discounts
Stock Level6

KRAFTWERK 5 rail super power supply kit powers up to 2 x 11 way 500 racks or 2 x 51X racks loaded with 11 x 500 & 11 x 51X Modules. Kraftwerk has tracking and auto shutdown for each +/-V1 & +/-V2 pair of power rails. So +/- rails power up and shutdown together minimising thumps and pops in any audio equipment it is powering. Also if a fault over currents and shuts down a power rail the other power rail will shut down in sync protecting expensive DOA and DIP8 opamps from internal latch up which can kill opamps. Uses silicon tubes on regs and 4 x 5mm bolts to locate PCB and hold the regs firm to the heatsink. So no white bush and hole burr cutting silicon pad problems. Can be quick released from heatsink in seconds for any maintenance.  Fits on back or front or inside 2 rack unit high cases.  Kraftwerk kit is PCB + all PCB parts. Heatsink is optional extra.

Features
 

  • 5 power rails. (3 positive and 2 negative @ 1.5Amp each) 
  • 26400uF (13200uF per +/-rail) Super smoothing cap bank.
  • +/-V1 & +/-V2 tracking. (eg the +/-V1 & +/-V2 power rails will track each other while powering up or down within +/-0.3v stopping most thumps and pops)
  • +/-V1 & +/-V2 auto shutdown. (eg if the +16v goes into protect and shuts down it will put down the -16v automatically as well and vica versa) 
  • KRAFTWERK PCB is ROHS GOLD HASL PLATED with thick copper.  
  • KRAFTWERK PCB measuring a tiny 121mm (4.76") x 59.5mm (2.34") 

Kraftwerk Parts List here

Kraftwerk Build Thread here


Kraftwerk can be configured for the below and many other combinations. 

4 x SSL 4000E/G Channels strips to provide +/-18v @ 1.5A and +13v @ 1.5A and -25v @ 1.5A and 48v @ 400mA using a 2 x 22vac 225VA to 300VA
500 series only to provide +16vdc @ 3Amp / -16vdc @ 3Amp and +48vdc @ 400mA using a 2 x 18vac 160VA to 225VA.
500/51X series to provide +16vdc @ 1.5Amp / -16vdc @ 1.5Amp and +24vdc @ 1.5Amp / -24vdc @ 1.5Amp and +48vdc @ 400mA using a 2 x 22vac 225VA to 300VA.
51X series to provide +24vdc @ 3Amp / -24vdc @ 3Amp and +48vdc @ 400mA using a 2 x 22vac 225VA to 300VA.

 Optional Kraftwerk Heatsink is 150mm wide x 75mm high x 38mm deep. Made to fit on back, front or inside 2 unit high rack cases.
   

KRAFTWERK PCB is ROHS GOLD HASL PLATED with thick copper. Measuring 121mm (4.76") x 59.5mm (2.34")

You can save money on this item when you purchase several at a time. The table below shows the minimum quantities required to benefit from this offer, and how much they'll cost.


QuantityPrice per unit
1$86.90AUD
5+$83.60AUD
10+$79.20AUD

Customer Reviews

This product hasn't been reviewed yet.

Write a review

Write Review

Anti-Spam Test
Please enter a valid email address.
This field is required.
Top

 

© 2001-2024. All rights reserved.