500 DIY Kits

This field is required.
  • VUPPM 500 Stereo Meter kit

    VUPPM 500 Stereo Meter kit

    New VUPPM500 Stereo Meter Kit 2x 40 LED Meter displays PPM and VU ballistics with peak hold at the same time.  50dB range. 30 x 1dB and 10 x 2dB steps Reversable Black PCB front panel with +18dBu scale on one side and 0dBFS on other. Mode Switch - VUPPM, Colour Mode 1, Colour Mode 2.…
    Digital Input Kit
    This field is required.

    $328.90AUD $295.90AUD inc GST for Australian Customers
    (Approx $187.85USD outside Australia)

    $328.90AUD $295.90AUD inc GST for Australian Customers
    (Approx $187.85USD outside Australia)

    This field is required.
    Digital Input Kit
    This field is required.
  • 500 Tester kit

    500 Tester kit

    500 TESTER kit for building and testing 500 modules seperate from a 500 rack with our or API standard 5 pin XLR power supply. LEDs for +16v, -16v and 48v power on. Resistors on pcb allow for current checking of each power rail. Kit parts 1 x main PCB 1 x Front panel PCB 1 x NC3-FAV…
    +/-16v@2A & +48v 65w SMPS
    Built and Tested
    This field is required.

    $54.45AUD $43.45AUD inc GST for Australian Customers
    (Approx $27.58USD outside Australia)

    $54.45AUD $43.45AUD inc GST for Australian Customers
    (Approx $27.58USD outside Australia)

    This field is required.
    +/-16v@2A & +48v 65w SMPS
    This field is required.
    Built and Tested
    This field is required.
  • FREQ500 Active EQ KIT

    FREQ500 Active EQ KIT

    FREQ500 kit is a very powerful 500 EQ module with fully variable 5 BAND + HPF active EQ. EQ that sounds natural. EQ circuit is a sidechain feed forward equaliser so has extremely low noise floor even at full boost. Separate PCB for Audio path and all filters so each pcb can be built and tes…

    $493.90AUD $438.90AUD inc GST for Australian Customers
    (Approx $278.64USD outside Australia)

    $493.90AUD $438.90AUD inc GST for Australian Customers
    (Approx $278.64USD outside Australia)

  • Matched Opto Pair

    Matched Opto Pair

    Matched Opto Pair for LA500 and LA500A.

    $55.00AUD inc GST for Australian Customers
    (Approx $34.92USD outside Australia)

    $55.00AUD inc GST for Australian Customers
    (Approx $34.92USD outside Australia)

  • LA500A Opto Compressor Kit

    LA500A Opto Compressor Kit

    5.0 average, based on 3 reviews

    NEW LA500A Opto Compressor kit comes complete with every part down to the last nut and bolt.NEW A Version has extra Slow attack mod and link with leds on front panel and 3 PCB no wiring layout If you order a pair of LA500A kits together on the same order we will automatically match the opto pai…

    $548.90AUD inc GST for Australian Customers
    (Approx $348.47USD outside Australia)

    $548.90AUD inc GST for Australian Customers
    (Approx $348.47USD outside Australia)

  • LA500 Slow Attack Mod Kit

    LA500 Slow Attack Mod Kit

    5.0 average, based on 1 reviews

    Kit of parts to add pull for Slow attack mod to LA500 opto comp kits to make them into a LA500A. Kit has new reverse log makeup pot with pull switch which the link feature is move too freeing up the threshold pull switch for new slow attack parts also in this kit. LA500 slow attack mod install…

    $22.00AUD inc GST for Australian Customers
    (Approx $13.97USD outside Australia)

    $22.00AUD inc GST for Australian Customers
    (Approx $13.97USD outside Australia)

  • 500 51X Extender Cable Kit

    500 51X Extender Cable Kit

    5.0 average, based on 1 reviews

    Pair of PCBs to make 500 / 51X Extender cable for building and testing 500 / 51X modules outside of the powered rack frame. (Photo above shows 51X version. Below shows cut down 500 version) PCB are double sided gold plated. PCB's are simply snapped by hand into 2 pieces and jointed with 16 pin…
    Built and Tested
    Module Type (Required)
    This field is required.

    $43.45AUD $26.95AUD inc GST for Australian Customers
    (Approx $17.11USD outside Australia)

    $43.45AUD $26.95AUD inc GST for Australian Customers
    (Approx $17.11USD outside Australia)

    This field is required.
    Built and Tested
    This field is required.
    Module Type (Required)
    This field is required.
  • BA500 Mic Pre Kit

    BA500 Mic Pre Kit

    5.0 average, based on 1 reviews

    BA500 mic pre kit comes complete with every part down to the last nut and bolt. You only need to pick the options for Input and output transformers, Opamp and DI input when ordering. BA500 mic pre kit uses 1 of our discrete 99v opamps (New +/-16v version) to provide 60dB of gain. It is aimed at g…
    DI Kit (Required)
    Input Transformer (Required)
    Opamp (Required)
    Output Transformer (Required)
    This field is required.

    $218.90AUD inc GST for Australian Customers
    (Approx $138.97USD outside Australia)

    BA500 Mic Pre Kit

    BA500 Mic Pre Kit

    5.0 average, based on 1 reviews

    $218.90AUD inc GST for Australian Customers
    (Approx $138.97USD outside Australia)

    This field is required.
    DI Kit (Required)
    This field is required.
    Input Transformer (Required)
    This field is required.
    Opamp (Required)
    This field is required.
    Output Transformer (Required)
    This field is required.
29
Top

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed. Continue if you wish to unsubscribe.
Subscribe
Unsubscribe