Time at JLM Shop:

Switches

This field is required.
  • Push Button Switch GREEN

    Push Button Switch GREEN

    PUSH NO PUSH OFF SPST Switch with red led  Switch type: Solder Tail SPST  Contact rating: 1.5A @ 250V AC  LED (typical voltage): 2V DC 20mA  Contact resistance: < 50mΩ  Insulation resistance: >100MΩ  Panel thickness: 0.75 - 3mm  Dialectric strength: >1500V AC 1 minute  …

    $4.40AUD inc GST for Australian Customers
    (Approx $2.80USD outside Australia)

    Stock Level3
    Info

    $4.40AUD inc GST for Australian Customers
    (Approx $2.80USD outside Australia)

    Info
    Stock Level3
  • Push Button Switch ORANGE

    Push Button Switch ORANGE

    PUSH NO PUSH OFF SPST Switch with red led  Switch type: Solder Tail SPST  Contact rating: 1.5A @ 250V AC  LED (typical voltage): 2V DC 20mA  Contact resistance: < 50mΩ  Insulation resistance: >100MΩ  Panel thickness: 0.75 - 3mm  Dialectric strength: >1500V AC 1 minute  …

    $4.40AUD inc GST for Australian Customers
    (Approx $2.80USD outside Australia)

    Stock Level100
    Info

    $4.40AUD inc GST for Australian Customers
    (Approx $2.80USD outside Australia)

    Info
    Stock Level100
  • Push Button Switch RED

    Push Button Switch RED

    PUSH NO PUSH OFF SPST Switch with red led  Switch type: Solder Tail SPST  Contact rating: 1.5A @ 250V AC  LED (typical voltage): 2V DC 20mA  Contact resistance: < 50mΩ  Insulation resistance: >100MΩ  Panel thickness: 0.75 - 3mm  Dialectric strength: >1500V AC 1 minute  …

    $4.40AUD inc GST for Australian Customers
    (Approx $2.80USD outside Australia)

    Stock Level100
    Info

    $4.40AUD inc GST for Australian Customers
    (Approx $2.80USD outside Australia)

    Info
    Stock Level100
  • Toggle DPDT PCB Centre Off long legs

    Toggle DPDT PCB Centre Off long legs

    DPDT Centre off toggle used on our LA500ASC PCB & NEW MAC RED RACKS (ON - OFF - ON)  with threaded bush with 2 nuts and lock washer. Same as image below but with 20mm+ long wire wrap legs

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Stock Level500
    Info

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Info
    Stock Level500
  • Rotary Switch 3 position 4 pole

    Rotary Switch 3 position 4 pole

    Rotary Switch 3 position 4 pole as used on our Passive Monitor PCB

    $4.40AUD inc GST for Australian Customers
    (Approx $2.80USD outside Australia)

    Stock Level15
    Info

    $4.40AUD inc GST for Australian Customers
    (Approx $2.80USD outside Australia)

    Info
    Stock Level15
  • PEQ500 HI Cut / Boost POT SWITCH PCB

    PEQ500 HI Cut / Boost POT SWITCH PCB

    Pot assembly used in PEQ500 for HI Cut / Boost with push for Shelf / push for Q switch and orange LED. Easiest way to fix a PEQ500 with orange led stuck in or off or or EQ stuck in Shelf or Q position.

    $32.45AUD inc GST for Australian Customers
    (Approx $20.67USD outside Australia)

    Stock Level20
    Info

    $32.45AUD inc GST for Australian Customers
    (Approx $20.67USD outside Australia)

    Info
    Stock Level20
  • PEQ500 HI BOOST POT SWITCH

    PEQ500 HI BOOST POT SWITCH

    Pot used in PEQ500 HI boost with push for Shelf / push for Q switch.

    $10.45AUD inc GST for Australian Customers
    (Approx $6.66USD outside Australia)

    Stock Level99
    Info

    $10.45AUD inc GST for Australian Customers
    (Approx $6.66USD outside Australia)

    Info
    Stock Level99
  • Gain Switch 2 x 12 position shorting

    Gain Switch 2 x 12 position shorting

    2 x 12 position Dual Rotary Switch with silver shorting contacts. Used for Gain Switch in TG500 500/51X Mic pres. MDS PCB to make dual switched pots with this switch here  

    $27.45AUD inc GST for Australian Customers
    (Approx $17.48USD outside Australia)

    Stock Level476
    Info

    $27.45AUD inc GST for Australian Customers
    (Approx $17.48USD outside Australia)

    Info
    Stock Level476
  • Gain Switch 2 x 12 position non-shorting

    Gain Switch 2 x 12 position non-shorting

    2 x 12 position Dual Rotary Switch with silver contact switching. Used for Gain Switch all of our  Dual99v500, NV500, 500/51X Mic pres & 1290 Macro Mic pre kit. Used for both LO & HI Frequency Switch in our PEQ500 EQ  MDS PCB to make dual switched pots with this switch here  …

    $27.45AUD inc GST for Australian Customers
    (Approx $17.48USD outside Australia)

    Stock Level497
    Info

    $27.45AUD inc GST for Australian Customers
    (Approx $17.48USD outside Australia)

    Info
    Stock Level497
  • Toggle DPDT PCB Centre Off

    Toggle DPDT PCB Centre Off

    DPDT Centre off toggle used on our MAC PCB (ON - OFF - ON)  with threaded bush with 2 nuts and lock washer.

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Stock Level113
    Info

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Info
    Stock Level113
  • Toggle DPDT PCB

    Toggle DPDT PCB

    DPDT toggle used on our BA, BAD, BAN, GO between & GO between PLUS PCBs (ON - NONE - ON) with threaded bush with 2 nuts and lock washer.

    $4.95AUD inc GST for Australian Customers
    (Approx $3.15USD outside Australia)

    Stock Level8
    Info

    $4.95AUD inc GST for Australian Customers
    (Approx $3.15USD outside Australia)

    Info
    Stock Level8
  • Large Toggle DPDT PCB

    Large Toggle DPDT PCB

    Large Toggle Switch PCB mount that is used in our power switch kits.

    $6.60AUD inc GST for Australian Customers
    (Approx $4.20USD outside Australia)

    Stock Level167
    Info

    $6.60AUD inc GST for Australian Customers
    (Approx $4.20USD outside Australia)

    Info
    Stock Level167
21
Top

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed. Continue if you wish to unsubscribe.
Subscribe
Unsubscribe

 

© 2001-2019. All rights reserved.