Time at JLM Shop:

Other Parts

This field is required.
  • JLM 500 rack module mounting bolts

    JLM 500 rack module mounting bolts

    20 x M3 x 8mm countersunk bolts used in Sidekick and Eleven racks for holding in 500 modules.  Order 1 for 1 pack of 20 bolts. 2 for 40 bolts etc

    $3.30AUD inc GST for Australian Customers
    (Approx $2.01USD outside Australia)

    Stock Level50

    $3.30AUD inc GST for Australian Customers
    (Approx $2.01USD outside Australia)

    Stock Level50
  • NV500 Green PCB Recap kit

    NV500 Green PCB Recap kit

    NV500 Green PCB Recap kit 2 x 3300uF 25v 3 x 470uF 50v 1 x 100uF 35v 1 x 4700uF 16v

    $16.50AUD inc GST for Australian Customers
    (Approx $10.07USD outside Australia)

    Stock Level9

    $16.50AUD inc GST for Australian Customers
    (Approx $10.07USD outside Australia)

    Stock Level9
  • Clip for JLM14 Transformer

    Clip for JLM14 Transformer

    Clip with double sided tape like used to hold JLM14 transformer in our Repro kits

    $1.00AUD inc GST for Australian Customers
    (Approx $0.67USD outside Australia)

    Stock Level0
    Out of stock

    $1.00AUD inc GST for Australian Customers
    (Approx $0.67USD outside Australia)

    Stock Level0
    Out of stock
  • Bridge Rectifier 25A SIL

    Bridge Rectifier 25A SIL

    25Amp 400v Bridge rectifier for use with our Powerstaion, Kraftwerk & V6 kits

    $4.40AUD inc GST for Australian Customers
    (Approx $2.68USD outside Australia)

    Stock Level16

    $4.40AUD inc GST for Australian Customers
    (Approx $2.68USD outside Australia)

    Stock Level16
  • RELAY12vDPDT

    RELAY12vDPDT

    DPDT RELAY 12v as used on BIO500v2 PCB

    $2.40AUD inc GST for Australian Customers
    (Approx $1.61USD outside Australia)

    Stock Level96

    $2.40AUD inc GST for Australian Customers
    (Approx $1.61USD outside Australia)

    Stock Level96
  • DUAL to 2xSINGLE DIP8 Adaptor

    DUAL to 2xSINGLE DIP8 Adaptor

    Socket adaptor for replacing DUAL DIP8 opamps with two modern single DIP8 opamps like OPA604AP or NE5534AP etc.  

    $19.80AUD inc GST for Australian Customers
    (Approx $12.08USD outside Australia)

    Stock Level3

    $19.80AUD inc GST for Australian Customers
    (Approx $12.08USD outside Australia)

    Stock Level3
  • TL074 to 2xDual DIP8 Adaptor

    TL074 to 2xDual DIP8 Adaptor

    Socket adaptor for replacing TL074 quad opamps with two modern dual DIP8 opamps like OPA2604AP or NE5532AP etc.  

    $22.00AUD inc GST for Australian Customers
    (Approx $13.42USD outside Australia)

    Stock Level6

    $22.00AUD inc GST for Australian Customers
    (Approx $13.42USD outside Australia)

    Stock Level6
  • 470R SIL 4 Buss Resistor

    470R SIL 4 Buss Resistor

    470R SIL 4 Buss Resistor as used in AMP Head and AMP Head II kits 2 off these are used per AMP Head pcb  

    $1.10AUD inc GST for Australian Customers
    (Approx $0.67USD outside Australia)

    Stock Level8

    $1.10AUD inc GST for Australian Customers
    (Approx $0.67USD outside Australia)

    Stock Level8
  • LED for JLM 34mm VU Meter backlight

    LED for JLM 34mm VU Meter backlight

    Replacement backlight led for our 34mm round VU meters. Square and round parts of meter snap apart and sclae slides up to reveal 5mm clear led which can be unsolder from to posts and replaced.

    $3.30AUD inc GST for Australian Customers
    (Approx $2.01USD outside Australia)

    Stock Level79

    $3.30AUD inc GST for Australian Customers
    (Approx $2.01USD outside Australia)

    Stock Level79
  • Matched Opto Pair

    Matched Opto Pair

    Matched Opto Pair for LA500 and LA500A.

    $55.00AUD inc GST for Australian Customers
    (Approx $33.56USD outside Australia)

    Stock Level98

    $55.00AUD inc GST for Australian Customers
    (Approx $33.56USD outside Australia)

    Stock Level98
  • XLR Male Neutrik A series Horizontal

    $5.50AUD inc GST for Australian Customers
    (Approx $3.36USD outside Australia)

    Stock Level928

    $5.50AUD inc GST for Australian Customers
    (Approx $3.36USD outside Australia)

    Stock Level928
  • XLR Female Neutrik A series Horizontal

    $5.50AUD inc GST for Australian Customers
    (Approx $3.36USD outside Australia)

    Stock Level711

    $5.50AUD inc GST for Australian Customers
    (Approx $3.36USD outside Australia)

    Stock Level711
  • 470uF 16v Non Polar Cap

    $1.93AUD inc GST for Australian Customers
    (Approx $1.17USD outside Australia)

    Stock Level290

    $1.93AUD inc GST for Australian Customers
    (Approx $1.17USD outside Australia)

    Stock Level290
  • 100uF 50v Non Polar Cap

    $1.65AUD inc GST for Australian Customers
    (Approx $1.01USD outside Australia)

    Stock Level212

    $1.65AUD inc GST for Australian Customers
    (Approx $1.01USD outside Australia)

    Stock Level212
  • 10uF 35v Non Polar Cap

    $0.55AUD inc GST for Australian Customers
    (Approx $0.34USD outside Australia)

    Stock Level828

    $0.55AUD inc GST for Australian Customers
    (Approx $0.34USD outside Australia)

    Stock Level828
  • 24vdc to 5v Switch Mode Power Supply

    24vdc to 5v Switch Mode Power Supply

    24v (+/-12v) to 5v 1W SMPS as used in our VUPPM kit 

    $16.50AUD inc GST for Australian Customers
    (Approx $10.07USD outside Australia)

    Stock Level1

    $16.50AUD inc GST for Australian Customers
    (Approx $10.07USD outside Australia)

    Stock Level1
  • 5v to +/-12v Switch Mode Power Supply 1W

    5v to +/-12v Switch Mode Power Supply 1W

    5v to +/-12v 1W SMPS as used in our VUPPM kit 

    $16.50AUD inc GST for Australian Customers
    (Approx $10.07USD outside Australia)

    Stock Level13

    $16.50AUD inc GST for Australian Customers
    (Approx $10.07USD outside Australia)

    Stock Level13
  • DB25 Shielded Cover

    DB25 Shielded Cover

     DB25 shielded cover

    $5.50AUD inc GST for Australian Customers
    (Approx $3.36USD outside Australia)

    Stock Level1

    $5.50AUD inc GST for Australian Customers
    (Approx $3.36USD outside Australia)

    Stock Level1
  • DB25 Female Solder Connector

    DB25 Female Solder Connector

      DB25 Female connector with solder cup rear connections  

    $2.20AUD inc GST for Australian Customers
    (Approx $1.34USD outside Australia)

    Stock Level13

    $2.20AUD inc GST for Australian Customers
    (Approx $1.34USD outside Australia)

    Stock Level13
  • DB25 Male Solder Connector

    DB25 Male Solder Connector

    DB25 Male connector with solder cup rear connections 

    $2.20AUD inc GST for Australian Customers
    (Approx $1.34USD outside Australia)

    Stock Level2

    $2.20AUD inc GST for Australian Customers
    (Approx $1.34USD outside Australia)

    Stock Level2
  • Ferrite Bead for BAN kit

    Ferrite Bead for BAN kit

    Double Ferrite Bead used in BAN kits You need 2  Double Ferrite Beads for each BAN PCB 

    $2.75AUD inc GST for Australian Customers
    (Approx $1.68USD outside Australia)

    Stock Level77

    $2.75AUD inc GST for Australian Customers
    (Approx $1.68USD outside Australia)

    Stock Level77
  • 2 x 10 Pin IDC Plugs

    2 x 10 Pin IDC Plugs

    Pair of 10 pin IDC Cable Headers 

    $2.20AUD inc GST for Australian Customers
    (Approx $1.34USD outside Australia)

    Stock Level183

    $2.20AUD inc GST for Australian Customers
    (Approx $1.34USD outside Australia)

    Stock Level183
  • 2SK170-BL FET

    2SK170-BL FET

    2SK170 FET as used in our FET DI kit.

    $2.75AUD inc GST for Australian Customers
    (Approx $1.68USD outside Australia)

    Stock Level234

    $2.75AUD inc GST for Australian Customers
    (Approx $1.68USD outside Australia)

    Stock Level234
  • 10 Wire Ribbon Cable 50cm

    10 Wire Ribbon Cable 50cm

    500mm length of 10 wire grey ribbon cable for use with IDC plugs

    $2.20AUD inc GST for Australian Customers
    (Approx $1.34USD outside Australia)

    Stock Level79

    $2.20AUD inc GST for Australian Customers
    (Approx $1.34USD outside Australia)

    Stock Level79
  • 10 Pin IDC Plug

    $1.10AUD inc GST for Australian Customers
    (Approx $0.67USD outside Australia)

    Stock Level460

    $1.10AUD inc GST for Australian Customers
    (Approx $0.67USD outside Australia)

    Stock Level460
  • 2 x 9v NiMH Batteries

    2 x 9v NiMH Batteries

    2 x 9v NiMH rechargeable batteries for MONO mic pre kit

    $38.50AUD inc GST for Australian Customers
    (Approx $23.49USD outside Australia)

    Stock Level6

    $38.50AUD inc GST for Australian Customers
    (Approx $23.49USD outside Australia)

    Stock Level6
  • Dual99v Flat Rack Front Panel

    Dual99v Flat Rack Front Panel

    Dual99v 1 rack unit flat Front panel with laser text not drilled (Note 2). This front panel is made to be used with Baby Animal Dual (BAD) and older original Dual99v kits. Panel can hold 2 mic pre kits with variable impedance and 2 DI kits. Note 2. These Flat Front Panels have all holes fully ce…
    Machine Panel (Required)
    This field is required.

    $60.50AUD inc GST for Australian Customers
    (Approx $36.91USD outside Australia)

    Stock Level2

    $60.50AUD inc GST for Australian Customers
    (Approx $36.91USD outside Australia)

    Stock Level2
    This field is required.
    Machine Panel (Required)
    This field is required.
  • 1272 Flat Rack Front Panel

    1272 Flat Rack Front Panel

    1272 rack 1 rack unit flat Front panel with laser text not drilled (Note 2). This front panel is made to be used with 2 x 1272 Neve mic pre modules. Panel can hold two 1272 with JLM 1272 to 1290 modules fitted  to make 75dB mic pre. Panel takes 2 x of our GO between kits and DI kits as well as…
    Machine Panel (Required)
    This field is required.

    $60.50AUD inc GST for Australian Customers
    (Approx $36.91USD outside Australia)

    Stock Level0
    Out of stock

    $60.50AUD inc GST for Australian Customers
    (Approx $36.91USD outside Australia)

    Stock Level0
    Out of stock
    This field is required.
    Machine Panel (Required)
    This field is required.
  • Bridge Rectifier 25A

    Bridge Rectifier 25A

    25Amp 400v Bridge rectifier for use with our AMP kit or most power amplifier or high current power supplies.

    $5.50AUD inc GST for Australian Customers
    (Approx $3.36USD outside Australia)

    Stock Level61

    $5.50AUD inc GST for Australian Customers
    (Approx $3.36USD outside Australia)

    Stock Level61
  • 8 Soft Limiter Plugs for TMP8

    8 Soft Limiter Plugs for TMP8

    Set of 8 soft limiter 3.5mm stereo plugs set to match your A/D converter. The TMP8 ships with a set new so you only need to order another set if you change to a A/D that has a different clip level. Just mention your A/D type or the dBM or dBu clip level in the comments box on checkout so we can supp…

    $55.00AUD inc GST for Australian Customers
    (Approx $33.56USD outside Australia)

    Stock Level43

    $55.00AUD inc GST for Australian Customers
    (Approx $33.56USD outside Australia)

    Stock Level43
  • BA4 Flat Rack Front Panel

    BA4 Flat Rack Front Panel

    BA4 1 rack unit flat Front panel with laser text not drilled (Note 2). This front panel is made to be used with Baby Animal (BA), Baby Animal Dual (BAD) and Baby Animal Neutral (BAN) kits. Panel can hold 4 mic pre kits and 2 DI kits. Note 2. These Flat Front Panels have all holes fully centre m…
    Machine Panel (Required)
    This field is required.

    $60.50AUD inc GST for Australian Customers
    (Approx $36.91USD outside Australia)

    Stock Level2

    $60.50AUD inc GST for Australian Customers
    (Approx $36.91USD outside Australia)

    Stock Level2
    This field is required.
    Machine Panel (Required)
    This field is required.
  • BA2 Flat Rack Front Panel

    BA2 Flat Rack Front Panel

    BA2 1 rack unit flat Front panel with laser text not drilled (Note 2). This front panel is made to be used with Baby Animal (BA), Baby Animal Dual (BAD) and Baby Animal Neutral (BAN) kits. Panel can hold 2 mic pre kits with variable impedance and 2 DI kits. Note 2. These Flat Front Panels have…
    Machine Panel (Required)
    This field is required.

    $60.50AUD inc GST for Australian Customers
    (Approx $36.91USD outside Australia)

    Stock Level3

    $60.50AUD inc GST for Australian Customers
    (Approx $36.91USD outside Australia)

    Stock Level3
    This field is required.
    Machine Panel (Required)
    This field is required.
  • PCB TRS Socket for OPA DI Kit

    PCB TRS Socket for OPA DI Kit

    DI Socket for OPA Opamp DI kit   Will replace all sockets that look the same like in Lexicon LXP1 etc. Cut off any pins on new socket that are not on original old socket and fit to PCB.

    $3.30AUD inc GST for Australian Customers
    (Approx $2.01USD outside Australia)

    Stock Level191

    $3.30AUD inc GST for Australian Customers
    (Approx $2.01USD outside Australia)

    Stock Level191
  • 6 x 1mm Sockets

    6 x 1mm Sockets

    6  x 1mm sockets for all of our BA, BAD, BAN PCB's. Sockets fit in 1.83mm hole on PCB and allow for plugging in 99v, Hybrid discrete opamps. 

    $6.60AUD inc GST for Australian Customers
    (Approx $4.03USD outside Australia)

    Stock Level52

    $6.60AUD inc GST for Australian Customers
    (Approx $4.03USD outside Australia)

    Stock Level52
  • 470uF 50v Capacitor

    470uF 50v Capacitor

    470uF 50v Capacitor used in our Baby Animal, Baby Animal Dual and Baby Animal Neutral kit and PCB's. 10mm diameter.

    $1.65AUD inc GST for Australian Customers
    (Approx $1.01USD outside Australia)

    Stock Level977

    $1.65AUD inc GST for Australian Customers
    (Approx $1.01USD outside Australia)

    Stock Level977
  • 1000uF 50v Capacitor

    1000uF 50v Capacitor

    1000uF 50v Capacitor used in our AC/DC and Powerstation kit. 13mm diameter.

    $1.65AUD inc GST for Australian Customers
    (Approx $1.01USD outside Australia)

    Stock Level520

    $1.65AUD inc GST for Australian Customers
    (Approx $1.01USD outside Australia)

    Stock Level520
  • 4136 to 2xDual DIP8 Adaptor

    4136 to 2xDual DIP8 Adaptor

    Socket adaptor for replacing 4136 quad opamps with two modern dual DIP8 opamps like OPA2604AP or NE5532AP etc. Good for upgrading LA4 compressors or Carver C1 hifi preamps or any device that uses 4136 opamps. Black LA4 needs 2 x 4136 adaptor and replace round output opamp with DIP8 wirewrap s…

    $22.00AUD inc GST for Australian Customers
    (Approx $13.42USD outside Australia)

    Stock Level30

    $22.00AUD inc GST for Australian Customers
    (Approx $13.42USD outside Australia)

    Stock Level30
11
Top

 

© 2001-2024. All rights reserved.