12PAKAMP PCB is a 12 channel version of our popular 60W AMP kit.

• 12 x 70Watts of power configurable to lots of combination (eg 6 x 140watt bridged, 3 x 280watt bridged, 1 x 780watt bridged, 1 x 280watt bridged + 2 x 140watt bridged + 4 x 70watt. etc)
• 2 x 12000uF 50v capacitor power rail smoothing banks on board PCB. So only power transformer, Bridge rectifier and heatsink needed to complete full 12 channel amp.
• +/-V regulated power rails for powering preamps, miniDSP cards, cooling fans etc.
• 1 or more miniDSP cards can be powered and interfaced to 12PAKAMP by 40 pin ribbon cable using our miniDSP Shield kit.
• Fully balanced inputs to all amps (can be wired unbalanced in by shorting either +in or -in to 0v depending on amp phase needed)
• Amp level setting trims on all channels. 
• Input Ribbon cable conforms to Tascam D25 so can clip into IDC D25 connector for quick wiring.
• Amp IC's can be fitted flat under PCB or vertical standing on top of PCB for different heatsink setups.
• PCB measures 295mm x 68mm

12PAKAMP kit build thread here

12PAKAMP BLUE kit parts list here