Time at JLM Shop:

VUPPM 500 Stereo Meter kit

VUPPM 500 Stereo Meter kit
  • Click to enlarge
  • Click to enlarge
  • Click to enlarge
Digital Input Kit

5.0 average, based on 1 reviews

$328.90AUD inc GST for Australian Customers
(Approx $200.66USD outside Australia)
Change currency to see all prices including options in your preferred currency.


Product Information
Stock Level2

VUPPM500 Stereo Meter Kit

2x 40 LED Meter displays PPM and VU ballistics with peak hold at the same time. 

  • 50dB range. 30 x 1dB and 10 x 2dB steps
  • Reversable Black PCB front panel with +18dBu scale on one side and 0dBFS on other.
  • Mode Switch - VUPPM, Colour Mode 1, Colour Mode 2. 
  • Peak Reset Switch clears Peak Hold LED
  • Peak Mode Switch - PPM Peak hold, PPM Peak Decay, VU Peak Decay & PPM Peak Hold, VU & PPM Peak Decay.
  • VUPPM mode shows VU in Green over PPM in red.
  • Colour modes shows Classic VU Green, Yellow, Red with PPM peak led.
  • Colour modes can be customised to any combo of colours before shipping. 
  • Meters use 500 rack pin 6 link wire to communicate and sync all meters.
  • Inputs Balanced Analog (with AES / SPDIF option coming soon)
  • Left in on input and right in on output with short female to female lead or TRS in and out on our Eleven rack.
  • If AES card fitted input XLR is AES digital stereo input. (with AES / SPDIF option coming soon) 
  • Blue LEDs mark ends of LED display and +4dBM 0VU and 0dBM PPM or AES digital input -14dfs K14 and -18dfs K18.
  • The 500 end pcb unbolts and is reversable for horizontal racks.
  • Test Mode press Colour Mode and Peak Mode switch together. All leds on RED then Green then Yellow, Loop. 
  • 3 Brightness level set by peak reset switch while in test mode.

 

Build Thread here

 

 


Customers also bought

Customer Reviews

Average Rating: 5

Professional...as always

12345
Have built this kit within a couple of hours.Absolutely no issues.Kit was complete up to the very last screw. Just follow the instructions im the build thread.Consists of 3 baggies each containing every part and pcb that belongs to the display, the main board and the edge pcb.There is another bag containing 2 front panels for either 0dBFS or +18dBu on both sides-and this means for either mounting vertically (in a 500 series rack) or horizontally (e.g.in a 1 ru rack or a custom build)! Meaning 4 choices to build-Bravo!The feature set is outstanding and easy to use.I can see it in a lot of scenarios. Another awesome piece of gear,CHAPEAU to Joe and his team...as always. Best regards! (Sun Feb 04 2024, 14:57 pm )

Write Review

Anti-Spam Test
Please enter a valid email address.
This field is required.
Top

 

© 2001-2024. All rights reserved.