Time at JLM Shop:

Other Parts

This field is required.
  • DUAL to 2xSINGLE DIP8 Adaptor

    DUAL to 2xSINGLE DIP8 Adaptor

    Socket adaptor for replacing DUAL DIP8 opamps with two modern single DIP8 opamps like OPA604AP or NE5534AP etc.  

    $19.80AUD inc GST for Australian Customers
    (Approx $12.61USD outside Australia)

    Stock Level10

    $19.80AUD inc GST for Australian Customers
    (Approx $12.61USD outside Australia)

    Stock Level10
  • TL074 to 2xDual DIP8 Adaptor

    TL074 to 2xDual DIP8 Adaptor

    Socket adaptor for replacing TL074 quad opamps with two modern dual DIP8 opamps like OPA2604AP or NE5532AP etc.  

    $22.00AUD inc GST for Australian Customers
    (Approx $14.01USD outside Australia)

    Stock Level8

    $22.00AUD inc GST for Australian Customers
    (Approx $14.01USD outside Australia)

    Stock Level8
  • 470R SIL 4 Buss Resistor

    470R SIL 4 Buss Resistor

    470R SIL 4 Buss Resistor as used in AMP Head and AMP Head II kits 2 off these are used per AMP Head pcb  

    $1.10AUD inc GST for Australian Customers
    (Approx $0.70USD outside Australia)

    Stock Level30

    $1.10AUD inc GST for Australian Customers
    (Approx $0.70USD outside Australia)

    Stock Level30
  • LED for JLM 34mm VU Meter backlight

    LED for JLM 34mm VU Meter backlight

    Replacement backlight led for our 34mm round VU meters. Square and round parts of meter snap apart and sclae slides up to reveal 5mm clear led which can be unsolder from to posts and replaced.

    $3.30AUD inc GST for Australian Customers
    (Approx $2.10USD outside Australia)

    Stock Level96

    $3.30AUD inc GST for Australian Customers
    (Approx $2.10USD outside Australia)

    Stock Level96
  • Festoon Bulb 12v

    Festoon Bulb 12v

    Festoon bulb which fits into the JLM Large VU meter light box. 

    $3.30AUD inc GST for Australian Customers
    (Approx $2.10USD outside Australia)

    Stock Level5

    $3.30AUD inc GST for Australian Customers
    (Approx $2.10USD outside Australia)

    Stock Level5
  • Matched Opto Pair

    Matched Opto Pair

    Matched Opto Pair for LA500 and LA500A.

    $55.00AUD inc GST for Australian Customers
    (Approx $35.03USD outside Australia)

    Stock Level-6

    $55.00AUD inc GST for Australian Customers
    (Approx $35.03USD outside Australia)

    Stock Level-6
  • Male Neutrik A series XLR

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Stock Level353

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Stock Level353
  • Female Neutrik A series XLR

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Stock Level217

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Stock Level217
  • 470uF 16v Non Polar Cap

    $1.93AUD inc GST for Australian Customers
    (Approx $1.23USD outside Australia)

    Stock Level405

    $1.93AUD inc GST for Australian Customers
    (Approx $1.23USD outside Australia)

    Stock Level405
  • 100uF 50v Non Polar Cap

    $1.65AUD inc GST for Australian Customers
    (Approx $1.05USD outside Australia)

    Stock Level264

    $1.65AUD inc GST for Australian Customers
    (Approx $1.05USD outside Australia)

    Stock Level264
  • 10uF 35v Non Polar Cap

    $0.55AUD inc GST for Australian Customers
    (Approx $0.35USD outside Australia)

    Stock Level970

    $0.55AUD inc GST for Australian Customers
    (Approx $0.35USD outside Australia)

    Stock Level970
  • 24vdc to 5v Switch Mode Power Supply

    24vdc to 5v Switch Mode Power Supply

    24v (+/-12v) to 5v 1W SMPS as used in our VUPPM kit 

    $16.50AUD inc GST for Australian Customers
    (Approx $10.51USD outside Australia)

    Stock Level2

    $16.50AUD inc GST for Australian Customers
    (Approx $10.51USD outside Australia)

    Stock Level2
  • 5v to +/-12v Switch Mode Power Supply 1W

    5v to +/-12v Switch Mode Power Supply 1W

    5v to +/-12v 1W SMPS as used in our VUPPM kit 

    $16.50AUD inc GST for Australian Customers
    (Approx $10.51USD outside Australia)

    Stock Level14

    $16.50AUD inc GST for Australian Customers
    (Approx $10.51USD outside Australia)

    Stock Level14
  • DB25 Shielded Cover

    DB25 Shielded Cover

     DB25 shielded cover

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Stock Level5

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Stock Level5
  • DB25 Female Solder Connector

    DB25 Female Solder Connector

      DB25 Female connector with solder cup rear connections  

    $2.20AUD inc GST for Australian Customers
    (Approx $1.40USD outside Australia)

    Stock Level13

    $2.20AUD inc GST for Australian Customers
    (Approx $1.40USD outside Australia)

    Stock Level13
  • DB25 Male Solder Connector

    DB25 Male Solder Connector

    DB25 Male connector with solder cup rear connections 

    $2.20AUD inc GST for Australian Customers
    (Approx $1.40USD outside Australia)

    Stock Level5

    $2.20AUD inc GST for Australian Customers
    (Approx $1.40USD outside Australia)

    Stock Level5
  • LED Festoon Bulb 12v

    LED Festoon Bulb 12v

    LED festoon bulb which fits into the JLM Large VU meter light box. So you will never have to change the bulb again. Led uses less than 5mA compared to the 95mA the origin bulb used.  This warm white Led lamp is very bright so a series resistor like 1k to 3k3 is recommended on 12v. Point the L…

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Stock Level2

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Stock Level2
  • Ferrite Bead for BAN kit

    Ferrite Bead for BAN kit

    Double Ferrite Bead used in BAN kits You need 2  Double Ferrite Beads for each BAN PCB 

    $2.75AUD inc GST for Australian Customers
    (Approx $1.75USD outside Australia)

    Stock Level83

    $2.75AUD inc GST for Australian Customers
    (Approx $1.75USD outside Australia)

    Stock Level83
  • 2 x 10 Pin IDC Plugs

    2 x 10 Pin IDC Plugs

    Pair of 10 pin IDC Cable Headers 

    $2.20AUD inc GST for Australian Customers
    (Approx $1.40USD outside Australia)

    Stock Level266

    $2.20AUD inc GST for Australian Customers
    (Approx $1.40USD outside Australia)

    Stock Level266
  • 2SK170-BL FET

    2SK170-BL FET

    2SK170 FET as used in our FET DI kit.

    $2.75AUD inc GST for Australian Customers
    (Approx $1.75USD outside Australia)

    Stock Level297

    $2.75AUD inc GST for Australian Customers
    (Approx $1.75USD outside Australia)

    Stock Level297
  • 10 Wire Ribbon Cable

    10 Wire Ribbon Cable

    500mm length of 10 wire grey ribbon cable for use with IDC plugs

    $2.20AUD inc GST for Australian Customers
    (Approx $1.40USD outside Australia)

    Stock Level49

    $2.20AUD inc GST for Australian Customers
    (Approx $1.40USD outside Australia)

    Stock Level49
  • 10 Pin IDC Plug

    $1.10AUD inc GST for Australian Customers
    (Approx $0.70USD outside Australia)

    Stock Level129

    $1.10AUD inc GST for Australian Customers
    (Approx $0.70USD outside Australia)

    Stock Level129
  • 2 x 9v NiMH Batteries

    2 x 9v NiMH Batteries

    2 x 9v NiMH rechargeable batteries for MONO mic pre kit

    $27.50AUD inc GST for Australian Customers
    (Approx $17.52USD outside Australia)

    Stock Level19

    $27.50AUD inc GST for Australian Customers
    (Approx $17.52USD outside Australia)

    Stock Level19
  • 25Amp Bridge Rectifier

    25Amp Bridge Rectifier

    25Amp 400v Bridge rectifier for use with our AMP kit or most power amplifier or high current power supplies.

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Stock Level74

    $5.50AUD inc GST for Australian Customers
    (Approx $3.50USD outside Australia)

    Stock Level74
  • 8 Soft Limiter Plugs for TMP8

    8 Soft Limiter Plugs for TMP8

    Set of 8 soft limiter 3.5mm stereo plugs set to match your A/D converter. The TMP8 ships with a set new so you only need to order another set if you change to a A/D that has a different clip level. Just mention your A/D type or the dBM or dBu clip level in the comments box on checkout so we can supp…

    $55.00AUD inc GST for Australian Customers
    (Approx $35.03USD outside Australia)

    Stock Level44

    $55.00AUD inc GST for Australian Customers
    (Approx $35.03USD outside Australia)

    Stock Level44
  • PCB TRS Socket for OPA DI Kit

    PCB TRS Socket for OPA DI Kit

    DI Socket for OPA Opamp DI kit   Will replace all sockets that look the same like in Lexicon LXP1 etc. Cut off any pins on new socket that are not on original old socket and fit to PCB.

    $3.30AUD inc GST for Australian Customers
    (Approx $2.10USD outside Australia)

    Stock Level245

    $3.30AUD inc GST for Australian Customers
    (Approx $2.10USD outside Australia)

    Stock Level245
  • 6 x 1mm Sockets

    6 x 1mm Sockets

    6  x 1mm sockets for all of our BA, BAD, BAN PCB's. Sockets fit in 1.83mm hole on PCB and allow for plugging in 99v, Hybrid discrete opamps. 

    $6.60AUD inc GST for Australian Customers
    (Approx $4.20USD outside Australia)

    Stock Level40

    $6.60AUD inc GST for Australian Customers
    (Approx $4.20USD outside Australia)

    Stock Level40
  • 470uF 50v Capacitor

    470uF 50v Capacitor

    470uF 50v Capacitor used in our Baby Animal, Baby Animal Dual and Baby Animal Neutral kit and PCB's. 10mm diameter.

    $1.65AUD inc GST for Australian Customers
    (Approx $1.05USD outside Australia)

    Stock Level732

    $1.65AUD inc GST for Australian Customers
    (Approx $1.05USD outside Australia)

    Stock Level732
  • 1000uF 50v Capacitor

    1000uF 50v Capacitor

    1000uF 50v Capacitor used in our AC/DC and Powerstation kit. 13mm diameter.

    $1.65AUD inc GST for Australian Customers
    (Approx $1.05USD outside Australia)

    Stock Level666

    $1.65AUD inc GST for Australian Customers
    (Approx $1.05USD outside Australia)

    Stock Level666
  • 4136 to 2xDual DIP8 Adaptor

    4136 to 2xDual DIP8 Adaptor

    Socket adaptor for replacing 4136 quad opamps with two modern dual DIP8 opamps like OPA2604AP or NE5532AP etc. Good for upgrading LA4 compressors or Carver C1 hifi preamps or any device that uses 4136 opamps. Black LA4 needs 2 x 4136 adaptor and replace round output opamp with DIP8 wirewrap s…

    $22.00AUD inc GST for Australian Customers
    (Approx $14.01USD outside Australia)

    Stock Level4

    $22.00AUD inc GST for Australian Customers
    (Approx $14.01USD outside Australia)

    Stock Level4
11
Top

Follow Us

Mailing List

Enter your e-mail address to receive our newsletter
Please enter a valid email address.
Email address already subscribed. Continue if you wish to unsubscribe.
Subscribe
Unsubscribe