500 / 51X to DBX 900 series adaptor Kit. Allows 500 or 51X series modules to plug into DBX900 series racks

Please note

• The 2 mounting holes on 900 series racks are slightly different spacing to 500 / 51X series so holes in 500 module may need to be made slightly larger.
• The gap between the top and bottom mounting surface is 116mm so some 500 module brackets may touch requiring some trimming to 500 module or 900 rack.

500 / 51X to DBX 900 series adaptor Kit parts

• 1 x 900 series edge PCB
• 1 x Front 500 series PCB
• 2 x Support PCBs
• 1 x 15 pin edge connector

Optional 24v to 48v for inverter for phantom power for 500 / 51X series mic pres

The 48v inverter on one adaptor can be wired to supply 48v power for other adaptors in the same 900 series rack.

• 24v to 48vdc SMPS module
• 2 x 100uF 50v
• 2 x 10uF 63v
• 3 x 10R