UA4110 / UA8110 POWER SUPPLY REPLACEMENT

Support for JLM Audio Kits

Moderators: JenAdmin, Joe Malone

Post Reply
User avatar
Joe Malone
Site Admin
Posts: 2241
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

UA4110 / UA8110 POWER SUPPLY REPLACEMENT

Post by Joe Malone »

DANGEROUS HIGH VOLTAGE STORED IN THESE POWER SUPPLIES

JLM Power Supply replaces Powdec power supply and 48v/Mute PCB and link cable.
All are not used again except for the U bracket and plastic insulation sheet.
UA4110-8110 (1).jpg
-
UA4110-8110 (2).jpg
-
UA4110-8110 (3).jpg
-
UA4110-8110 (4).jpg
-
UA4110-8110 (5).jpg
-
UA4110-8110 (6).jpg
-
UA4110-8110 (8).jpg
-
UA4110-8110 (7).jpg
-
UA4110 (6).png
-
UA4110 (3).jpg
NOTE 6 pin plug goes directly to mic pre cards only. Do not try and use JLM power supply to run original 48v/mute pcb as pinout is different
You do not have the required permissions to view the files attached to this post.
Joe :-)
JLM Audio
Capturing Audio without Injury

Post Reply