Hi Joe
In your MP8 product you mention digital control and recall. I wanted to clarify exactly what this means. I am working on building my second remote recording rig. The current one is based on a passive splitter at the stage with signals routed to 24 channels of rack pres back at the recording station or truck. I have decided to move to putting the pre-amps at the splitter and routing the line level signal to a MADI converter then sending the MADI back to the truck. The problem I want to address is remotely controlling the Pres from the station or truck. Is the MP8 capable of being controlled remotely via Midi signals?
Thansk
Mick
MP8 digitally controlled
Moderator: mixmup
-
Mick@ITC
- Posts: 32
- Joined: Fri Aug 24, 2007 1:20 pm
- Location: Melbourne
- Contact:
-
Joe Malone
- Site Admin
- Posts: 2174
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact:
Re: MP8 digitally controlled
Sorry I missed this new thread.
The MP8 front panel controls can be about a 100 or so meters away from the 8 channel slave mic pre box. The one MP8 front panel can control 64 channels of MP8 pres remotely. Only 1 lan cable or mic cable is needed to link the MP8 front to the 8 to 64 MP8 remote mic pres. The MP8 front panel controls can also store several full setups for instant recall.
The MP8 front panel controls can be about a 100 or so meters away from the 8 channel slave mic pre box. The one MP8 front panel can control 64 channels of MP8 pres remotely. Only 1 lan cable or mic cable is needed to link the MP8 front to the 8 to 64 MP8 remote mic pres. The MP8 front panel controls can also store several full setups for instant recall.
Joe 
JLM Audio
Capturing Audio without Injury
JLM Audio
Capturing Audio without Injury
-
Mick@ITC
- Posts: 32
- Joined: Fri Aug 24, 2007 1:20 pm
- Location: Melbourne
- Contact:
Re: MP8 digitally controlled
Wow...you have just opened up a new possibility for my live recording rigs...
Thansk
Mick
Thansk
Mick