Hi,
I have a single 20vac and I need just 48V. Now I bit puzzled with Doubler/Tripler thing but ver. 4 ( mine is v5 ) schematic shows that if Doubler position I don't need to populate the whole board. Am I on right track?
AC/DC & POWERSTATION KIT BUILD THREAD
Moderators: JenAdmin, Joe Malone
-
theaterguy
- Posts: 13
- Joined: Sat Apr 07, 2012 11:42 pm
-
Joe Malone
- Site Admin
- Posts: 2241
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact:
Re: AC/DC & POWERSTATION KIT BUILD THREAD
Joe Malone wrote: ↑Sat Mar 15, 2025 8:27 pmFor 48v only on doubler all parts in the red boxes are needed. Wire 20vac to one AC in and 0vtheaterguy wrote: ↑Sat Mar 15, 2025 3:46 amHi,
I have a single 20vac and I need just 48V. Now I bit puzzled with Doubler/Tripler thing but ver. 4 ( mine is v5 ) schematic shows that if Doubler position I don't need to populate the whole board. Am I on right track?
You do not have the required permissions to view the files attached to this post.
Joe 
JLM Audio
Capturing Audio without Injury
JLM Audio
Capturing Audio without Injury
-
theaterguy
- Posts: 13
- Joined: Sat Apr 07, 2012 11:42 pm
Re: AC/DC & POWERSTATION KIT BUILD THREAD
Thanks Joe