Jlm DI Opamp version Connect parallell DI input eg. Neutrik combo Jack

Support for JLM Audio Kits

Moderator: Joe Malone

Post Reply
Bergis2
Posts: 1
Joined: Mon Jun 24, 2024 6:16 am

Jlm DI Opamp version Connect parallell DI input eg. Neutrik combo Jack

Post by Bergis2 »

Hello!
Have an old DI kit with opamp, is there any mod or something to do for attaching a parallell instrument input with in my case a Neutrik switching combojack for instrument in?

Found the external switch mod for the DI fet(cut trace) but not the schematisk to Compere.

Thank you! /pontus

User avatar
Joe Malone
Site Admin
Posts: 2113
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Re: Jlm DI Opamp version Connect parallell DI input eg. Neutrik combo Jack

Post by Joe Malone »

Bergis2 wrote:
Mon Jun 24, 2024 3:34 pm
Hello!
Have an old DI kit with opamp, is there any mod or something to do for attaching a parallell instrument input with in my case a Neutrik switching combojack for instrument in?

Found the external switch mod for the DI fet(cut trace) but not the schematisk to Compere.

Thank you! /pontus
I am not sure what you mean by parallel inst input? Do you mean thru output? or you actually want to plug in 2 devices to the one DI?

If you just want the combo jack to auto switch from mic xlr input to Di inst jack input it would have to have a DPDT switch built-in to the combo jack or a SPST switch to operate a DPDT relay.
Joe :-)
JLM Audio
Capturing Audio without Injury

Post Reply