MP8 digitally controlled

JLM Products support and what's new

Moderator: mixmup

Post Reply
User avatar
Mick@ITC
Posts: 32
Joined: Fri Aug 24, 2007 1:20 pm
Location: Melbourne
Contact:

MP8 digitally controlled

Post by Mick@ITC »

Hi Joe

In your MP8 product you mention digital control and recall. I wanted to clarify exactly what this means. I am working on building my second remote recording rig. The current one is based on a passive splitter at the stage with signals routed to 24 channels of rack pres back at the recording station or truck. I have decided to move to putting the pre-amps at the splitter and routing the line level signal to a MADI converter then sending the MADI back to the truck. The problem I want to address is remotely controlling the Pres from the station or truck. Is the MP8 capable of being controlled remotely via Midi signals?
Thansk
Mick

User avatar
Joe Malone
Site Admin
Posts: 2069
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Re: MP8 digitally controlled

Post by Joe Malone »

Sorry I missed this new thread.

The MP8 front panel controls can be about a 100 or so meters away from the 8 channel slave mic pre box. The one MP8 front panel can control 64 channels of MP8 pres remotely. Only 1 lan cable or mic cable is needed to link the MP8 front to the 8 to 64 MP8 remote mic pres. The MP8 front panel controls can also store several full setups for instant recall.
Joe :-)
JLM Audio
Capturing Audio without Injury

User avatar
Mick@ITC
Posts: 32
Joined: Fri Aug 24, 2007 1:20 pm
Location: Melbourne
Contact:

Re: MP8 digitally controlled

Post by Mick@ITC »

Wow...you have just opened up a new possibility for my live recording rigs...
Thansk
Mick

Post Reply