GEQ500 kit BUILD THREAD

Support for JLM Audio Kits

Moderator: Joe Malone

Post Reply
User avatar
Joe Malone
Site Admin
Posts: 1949
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:
Contact Joe Malone

GEQ500 kit BUILD THREAD

Post by Joe Malone »

UNDER CONSTRUCTION
Ask any questions you have while building the kit here so I can add more info to help

GEQ500 EDGE PCB BUILD MAP
http://jlmaudio.com/builds/maps/GEQ500_Edge_map.html

GEQ500 CONTROL PCB BUILD MAP
http://jlmaudio.com/builds/maps/GEQ500_Control_map.html

GEQ500 FILTER PCB BUILD MAP
http://jlmaudio.com/builds/maps/GEQ500_FADER_map.html

GEQ500 Fader.jpg
GEQ500 Fader 1.jpg
GEQ500 Fader 2.jpg
GEQ500 Fader 3.jpg
GEQ500 Fader 4.jpg
GEQ500 Fader 5.jpg
GEQ500 Fader 6.jpg
GEQ500 Fader 7.jpg
GEQ500 Fader 8.jpg
GEQ500 Fader 9.jpg
GEQ500 Fader 10.jpg
GEQ500 Fader 11.jpg
GEQ500 Fader 12.jpg
GEQ500 Fader 13.jpg
GEQ500 Fader 14.jpg
GEQ500 Fader 15.jpg
GEQ500 Fader 16.jpg
RGB Led alignment.jpg
GEQ500 Edge Test.jpg
GEQ500 Edge & Control Test.jpg
GEQ500 Edge & Control Test 2.jpg
GEQ500 Edge & Control Test 3.jpg
Edge solder pads 3.jpg
You do not have the required permissions to view the files attached to this post.
Joe :-)
JLM Audio
Capturing Audio without Injury
Top
Post Reply

Return to “JLM Audio Kits”