PEQ500a with Twenty 5 twenty op amps

Support for JLM Audio Kits

Moderator: Joe Malone

Post Reply
CwCStudio
Posts: 2
Joined: Sat Apr 08, 2023 12:22 pm

PEQ500a with Twenty 5 twenty op amps

Post by CwCStudio »

Hi folks
Wondering if it’s possible to put the twenty 5 twenty op amps in the Peq500a. If so, how did it go?
Happy results?

User avatar
Joe Malone
Site Admin
Posts: 2103
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Re: PEQ500a with Twenty 5 twenty op amps

Post by Joe Malone »

CwCStudio wrote:
Sat Apr 08, 2023 7:54 pm
Hi folks
Wondering if it’s possible to put the twenty 5 twenty op amps in the Peq500a. If so, how did it go?
Happy results?
The JLM99v opamps can be replaced with Twenty 5 Twenty opamps but it will remove a lot of the low end warmth due to the much faster and tighter tone of the Twenty 5 Twenty opamps in the audio path.
Joe :-)
JLM Audio
Capturing Audio without Injury

CwCStudio
Posts: 2
Joined: Sat Apr 08, 2023 12:22 pm

Re: PEQ500a with Twenty 5 twenty op amps

Post by CwCStudio »

Thanks Joe, much appreciated.
It might be what I’m looking for (u47 into a 1073 so have ample low / low mids). I was thinking this might give a bit more of an aggressive mid push and if I have to boost the lows a tiny bit, it might be ok.

Post Reply