Hi folks
Wondering if it’s possible to put the twenty 5 twenty op amps in the Peq500a. If so, how did it go?
Happy results?
PEQ500a with Twenty 5 twenty op amps
Moderator: Joe Malone
- Joe Malone
- Site Admin
- Posts: 2070
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact:
Re: PEQ500a with Twenty 5 twenty op amps
The JLM99v opamps can be replaced with Twenty 5 Twenty opamps but it will remove a lot of the low end warmth due to the much faster and tighter tone of the Twenty 5 Twenty opamps in the audio path.
Joe
JLM Audio
Capturing Audio without Injury
JLM Audio
Capturing Audio without Injury
Re: PEQ500a with Twenty 5 twenty op amps
Thanks Joe, much appreciated.
It might be what I’m looking for (u47 into a 1073 so have ample low / low mids). I was thinking this might give a bit more of an aggressive mid push and if I have to boost the lows a tiny bit, it might be ok.
It might be what I’m looking for (u47 into a 1073 so have ample low / low mids). I was thinking this might give a bit more of an aggressive mid push and if I have to boost the lows a tiny bit, it might be ok.