Hi Joe
Just touching base to see if you received the pics over email. No rush of course, just checking - I’m sure you have loads to get through.
I have a suspicion it’s a dodgy solder joint but didn’t want to proceed trying stuff out until I heard from you!
Cheers
Alex
LA500A opto comp leveling amp BUILD THREAD 500/51X
Moderator: Joe Malone
-
- Posts: 20
- Joined: Thu Jan 13, 2022 1:37 am
Online
- Joe Malone
- Site Admin
- Posts: 2082
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact:
Re: LA500A opto comp leveling amp BUILD THREAD 500/51X
Hi Alex from your photos you have 3 x 470R to the 3 x 33R resistor position which is why you are getting a level drop. Change the 3 resistors to the correct value 33R will fix this.Alex1990 wrote: ↑Fri Jan 21, 2022 5:13 amHi Joe
Just touching base to see if you received the pics over email. No rush of course, just checking - I’m sure you have loads to get through.
I have a suspicion it’s a dodgy solder joint but didn’t want to proceed trying stuff out until I heard from you!
Cheers
Alex
Joe
JLM Audio
Capturing Audio without Injury
JLM Audio
Capturing Audio without Injury