MAC RACK KIT with Green MAC & DINGO PCBs Build Thread

Support for JLM Audio Kits

Moderator: Joe Malone

frans
Posts: 21
Joined: Mon Mar 07, 2011 7:43 pm
Location: Bavaria, Germany
Contact:

Re: MAC RACK KIT with Green MAC & DINGO PCBs Build Thread

Post by frans »

Or i could take another LED and try it outside the meter? By the way - is there an easy way to open the meter and change the LED?
Thanks a lot for your help, Joe!

User avatar
Joe Malone
Site Admin
Posts: 2068
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Re: MAC RACK KIT with Green MAC & DINGO PCBs Build Thread

Post by Joe Malone »

frans wrote:Or i could take another LED and try it outside the meter? By the way - is there an easy way to open the meter and change the LED?
Thanks a lot for your help, Joe!
Yes as long as you wire the led the correct way around that will work.

The round section of the meter unclicks from the square section of the meter and then the scale slides up to reveal the led and 2 solder posts.
Joe :-)
JLM Audio
Capturing Audio without Injury

frans
Posts: 21
Joined: Mon Mar 07, 2011 7:43 pm
Location: Bavaria, Germany
Contact:

Re: MAC RACK KIT with Green MAC & DINGO PCBs Build Thread

Post by frans »

Joe, you're my hero. Again. Greetings and thanks from Bavaria,
Frans

Post Reply