Hey all,
Im building my 4th BA and this one has a slightly different PCB to the older ones I have done. This one contains a 10uf cap, whilst the older ones do not. What is this for? Cant seem to find any info on the PCBs???
Baby Animal - 10uF Cap
Moderator: Joe Malone
- Joe Malone
- Site Admin
- Posts: 2082
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact:
Re: Baby Animal - 10uF Cap
It is extra smoothing for the emitter of the BD681 opamp reg when it is used to lower the voltage for opamps that cannot run on 48v. When linking over the BD681 the 10uF can be left on or off with any performance difference.Paul wrote:Hey all,
Im building my 4th BA and this one has a slightly different PCB to the older ones I have done. This one contains a 10uf cap, whilst the older ones do not. What is this for? Cant seem to find any info on the PCBs???
Joe
JLM Audio
Capturing Audio without Injury
JLM Audio
Capturing Audio without Injury
-
- Posts: 30
- Joined: Sat Mar 24, 2007 5:16 pm
Re: Baby Animal - 10uF Cap
ahahh!! thanks for the info Joe.
Is there anywhere that points that out? If not if might be a great idea to get a FAQ written for these???
Is there anywhere that points that out? If not if might be a great idea to get a FAQ written for these???