VU BLUE LED KIT BUILD THREAD

Support for JLM Audio Kits

Moderator: Joe Malone

Post Reply
Online
User avatar
Joe Malone
Site Admin
Posts: 2069
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

VU BLUE LED KIT BUILD THREAD

Post by Joe Malone »

VU
ImageImage

SEW Meter with Orange Lamp (Flashstar Meter is very similair)
Image

Blue LED kit and below how to fit it to the SEW Meter
(LEDs are now 2 x 5 diffused rectangle type)
Image

Blue LED kit assembled (A is the long leg of the LED)
Image
The Blue led kit runs on 12v without a resistor in series.
Positive for the LED is on same side as the meter positive.
The LED is the 2 outside terminals on the back of the meter.
If you want to run the LED on more volts you will need to add a series resistor.
Use this formula R = (V - 12) / 0.02.

SEW Meter without Bezel
Image

SEW Meter without Clear cover
Image

SEW Meter orange lamp
Image

SEW Meter cut orange lamp off leaving wire legs behind
Image

Fold the two cut lamp wires downwards
Image

Slide blue lamp PCB on to the 2 wires and solder on
Image

Blue LED Kit fitted to SEW meter
Image

Blue LED kit running on 12v
Image

SEW Meter Glow with Blue LED kit fitted
Image
Joe :-)
JLM Audio
Capturing Audio without Injury

Post Reply