Search found 12 matches

by Corpselectriques
Tue Jun 08, 2021 5:31 pm
Forum: JLM Audio Kits
Topic: 8 Channel Relay Switch Build Thread
Replies: 26
Views: 21778

Re: 8 Channel Relay Switch Build Thread

Thanks Joe...
Wasn't sure about the SPDT and already have the DPDT's, will do that way... but good to know !

All the best
by Corpselectriques
Fri Jun 04, 2021 8:11 pm
Forum: JLM Audio Kits
Topic: 8 Channel Relay Switch Build Thread
Replies: 26
Views: 21778

Re: 8 Channel Relay Switch Build Thread

Hi

Does the Schematic link is the right way to connect it, switching them by pair/stereo !
I will use 12v Relay and +12v power supply and as I understand regulator will be not need or does it still need and/or better/recommend with !?

thanks & care
F
by Corpselectriques
Sat Oct 03, 2020 2:50 am
Forum: JLM Audio Kits
Topic: VU BUFFER & PEAK LED KIT BUILD THREAD
Replies: 111
Views: 136705

Re: VU BUFFER & PEAK LED KIT BUILD THREAD

Dear Joe I just made the Vu2 buffer kit and it's so easy ! and great to recover feeling of vu meter and look off computer !!! So, I miss having Meter on my lunchbox mostly for 1 preamp, so I was thinking : I could have preamp on Slot (1) and a Vu meter on the next slot (2), link the (1) output to th...
by Corpselectriques
Sun Jul 05, 2020 9:30 pm
Forum: JLM Audio Kits
Topic: Passive Controller Build Thread Ver 1 & 2
Replies: 47
Views: 53277

Re: Passive Controller Build Thread Ver 1 & 2

Hi Joe I see you add a note : Note 4. Do not push rotary switches down to the pcb as they may short on solder joints under them. I cut the pins under the Switch short, but yes, I pushed them. Do you think that's the cause ! It be too hard/long and not equipped to unsolder all the Switch pin for move...
by Corpselectriques
Sun Jul 05, 2020 4:47 am
Forum: JLM Audio Kits
Topic: Passive Controller Build Thread Ver 1 & 2
Replies: 47
Views: 53277

Re: Passive Controller Build Thread Ver 1 & 2

Hi Joe Here is few pictures... don't know if that will help ! Switch are on the front and IDE on the back... A/C IN and A/C OUT are on the center 26 pin IDE. IN ext is used for B Input. Same if I put the connector, I'm am not using the B output and the Input slots. (what that input slot for ! don't...
by Corpselectriques
Sat Jul 04, 2020 1:22 am
Forum: JLM Audio Kits
Topic: Passive Controller Build Thread Ver 1 & 2
Replies: 47
Views: 53277

Re: Passive Controller Build Thread Ver 1 & 2

Hi Joe Here is few pictures... don't know if that will help ! Switch are on the front and IDE on the back... A/C IN and A/C OUT are on the center 26 pin IDE. IN ext is used for B Input. Same if I put the connector, I'm am not using the B output and the Input slots. (what that input slot for ! don't ...
by Corpselectriques
Fri Jul 03, 2020 10:41 pm
Forum: JLM Audio Kits
Topic: Passive Controller Build Thread Ver 1 & 2
Replies: 47
Views: 53277

Re: Passive Controller Build Thread Ver 1 & 2

Hi Joe I'm running over issue like L/R going on same Out ( A-Left or B-Left). Mode Switch doesn't make a change. try to debug, but I have a doubt which can help me put side things step by step and figure where it from. Does the rotary Alpha switch have to be fit/flip on a particular way ? Side to th...
by Corpselectriques
Mon Jun 22, 2020 10:32 pm
Forum: JLM Audio Kits
Topic: Passive Controller Build Thread Ver 1 & 2
Replies: 47
Views: 53277

Re: Passive Controller Build Thread Ver 1 & 2

Thanks for your quick reply°°°

best
F
by Corpselectriques
Mon Jun 22, 2020 9:47 pm
Forum: JLM Audio Kits
Topic: Passive Controller Build Thread Ver 1 & 2
Replies: 47
Views: 53277

Re: Passive Controller Build Thread Ver 1 & 2

Hi Joe I receive PCB and looking forward to built it but still confused about the POT wiring. You mention that the IDC connectors follow STBUS pinout (STBUS = Pin 1 L+, pin 2 L-, pin 3&4 +V, pin 5&6 0v, pin 7&8 -V, pin 9 R-, pin 10 R+.) On V1 pcb it's labelled B = L- / R= L+ / W = R- / Y = R+, So on...
by Corpselectriques
Sat Jun 06, 2020 3:29 am
Forum: JLM Audio Kits
Topic: Passive Controller Build Thread Ver 1 & 2
Replies: 47
Views: 53277

Re: Passive Controller Build Thread Ver 1 & 2

Hi Rocinante Sometimes it's good to have a resume of a 2 pages thread in 3 lines... for the others ! Like I have to read the 2 pages for understand it... I imagine next people be happy about a quick resume ! For the Pot: I'm using the V2 PCB and as you can see nothing print on PCB, and no talk about...
by Corpselectriques
Sat Jun 06, 2020 12:14 am
Forum: JLM Audio Kits
Topic: Passive Controller Build Thread Ver 1 & 2
Replies: 47
Views: 53277

Re: Passive Controller Build Thread Ver 1 & 2

Hi All I can't find any information for the Pot wiring and no print on PCB V2. Could it be possible to have a sketch or something ? Related to the DB25 connector and the picture with glossary above, 1/2/3/4 are input and 5/6/7/8 output... I assume 1(L)-2(R) are A input and 3-4 C Input — 5(L)/6(R) A ...
by Corpselectriques
Sat Apr 20, 2019 9:27 pm
Forum: JLM Audio Kits
Topic: Stereolab kit Build Thread
Replies: 2
Views: 5468

Re: Stereolab kit Build Thread

Hi Here is the built I made using 4 stereolab (= 8 unbalanced in to 8 balanced out)... tested & work... just try with tone generator, can't wait to used with 'real' sound... if you have suggestion or recommandation it's welcome and still time... about the trim pot J3L/J3R ! i was thinking they can b...