1272 rack 1 rack unit flat Front panel with laser text not drilled(Note 2). This front panel is made to be used with 2 x 1272 Neve mic pre modules. Panel can hold two 1272 with JLM 1272 to 1290 modules fitted to make 75dB mic pre. Panel takes 2 x of our GO between kits and DI kits as well as power switch kit.
Note 2.Best to cover JLM panel with 2" paper tape like painters use as you can see through it still and protects against accidental scratches. Centre punch holes through tape and pilot drill all holes with a 2.5mm drill before drilling them to size. Use a large size drill bit or de-burring tool to clean the edges of the final holes.
You can save money on this item when you purchase several at a time. The table below shows the minimum quantities required to benefit from this offer, and how much they'll cost.
| Quantity | Price per unit |
|---|
| 1 | $60.50AUD |
| 5+ | $57.48AUD |
| 10+ | $54.45AUD |
