Adding insert path to BA?
Moderator: Joe Malone
-
- Posts: 12
- Joined: Thu Mar 12, 2009 1:15 pm
Adding insert path to BA?
How hard would it be to include an insert path (1/4" TRS) to a baby animal? I'm thinking I'll eventually want to track with some outboard compressors.
- Joe Malone
- Site Admin
- Posts: 2082
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact:
Re: Adding insert path to BA?
The BA pcb is a one stage mic pre so there is no where to insert except after it. The BAD PCB can have a insert added into the wire going from the O to the output level pot easily as it is a 2 stage mic pre.
Joe
JLM Audio
Capturing Audio without Injury
JLM Audio
Capturing Audio without Injury
-
- Posts: 12
- Joined: Thu Mar 12, 2009 1:15 pm
Re: Adding insert path to BA?
I see. I suppose it really won't matter since I'll be using a A/D converter. I can go mic->ba->compressor->A/D converter, right?
Aric
Aric
- Joe Malone
- Site Admin
- Posts: 2082
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact: