Or i could take another LED and try it outside the meter? By the way - is there an easy way to open the meter and change the LED?
Thanks a lot for your help, Joe!
MAC RACK KIT with Green MAC & DINGO PCBs Build Thread
Moderator: Joe Malone
- Joe Malone
- Site Admin
- Posts: 2078
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact:
Re: MAC RACK KIT with Green MAC & DINGO PCBs Build Thread
Yes as long as you wire the led the correct way around that will work.frans wrote:Or i could take another LED and try it outside the meter? By the way - is there an easy way to open the meter and change the LED?
Thanks a lot for your help, Joe!
The round section of the meter unclicks from the square section of the meter and then the scale slides up to reveal the led and 2 solder posts.
Joe
JLM Audio
Capturing Audio without Injury
JLM Audio
Capturing Audio without Injury
Re: MAC RACK KIT with Green MAC & DINGO PCBs Build Thread
Joe, you're my hero. Again. Greetings and thanks from Bavaria,
Frans
Frans