I bought the new PowerStation Ver. 5 Easy Mount kit but
the + 48V does not work Do you have the electronic schematic of this kit?
+V1 +V2 -V1 -V2 works perfectly in +6v / +18V / -18V / -24V
Schematic is the same as one one on the 1st page of this thread. Only the pcb has been rearranged for better layout and several mounting options
Link to schematic http://www.jlmaudio.com/JLM%20PowerStat ... ematic.pdf
Since you have a -24v rail you must be using a 2 x 22vac to 25vac transformer so T/D jumper needs to be set to doubler for 48v rail to pump charge and work. If you set to tripler the voltage will be very high and can damage the 48v reg and burn the 47R 1w resistor.
Let me know if you have any more questions