Passive Controller Build Thread

Support for JLM Audio Kits

Moderator: Joe Malone

Mjwever
Posts: 4
Joined: Wed Sep 12, 2018 6:09 pm

Re: Passive Controller Build Thread

Postby Mjwever » Thu Sep 13, 2018 7:33 pm

So the PIN numbers on the bottom of the switch don’t matter? Btw - I’m using a Lorlin rotary switch.. I had oriented the switch so the inner row of pins had the A pin at 12 o’clock

User avatar
Joe Malone
Site Admin
Posts: 1580
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Re: Passive Controller Build Thread

Postby Joe Malone » Thu Sep 13, 2018 9:06 pm

Mjwever wrote:So the PIN numbers on the bottom of the switch don’t matter? Btw - I’m using a Lorlin rotary switch.. I had oriented the switch so the inner row of pins had the A pin at 12 o’clock


OK the PCB is made for open metal frame alpha switches but the lorlin if the pin out fits the pcb should work fine and not matter which of the 4 ways it will fit.
Joe :-)
JLM Audio
Capturing Audio without Injury

Mjwever
Posts: 4
Joined: Wed Sep 12, 2018 6:09 pm

Re: Passive Controller Build Thread

Postby Mjwever » Thu Sep 13, 2018 9:11 pm

Thanks so much Joe. Really appreciate it

Return to “JLM Audio Kits”

Who is online

Users browsing this forum: No registered users and 4 guests