Joe Malone wrote:
Have a stereo compact box and scale coming as well as a 1unit rack case scale. Looking for input on what other scale levels or types people are interested in like mono, 0DFS etc
Stereo compact box will have a optional pre made stereo D/A card for spdif and toslink inputs.
Hi Joe,
very very nice,0dB FS would be great for me as well as SPDIF and TOSLINK inputs.Next step would be an ADAT input (for 8 mono or 4 stereo displays) as the TOSLINK is already there?
Early Test Sample of Vertical Scale for a customer to fit 2 x VUPPM Meters into one unit of his Crockwood Mastering Console Frame.
OdBFS in centre. Will do a 500 Series version as well.
Early Test Sample of Vertical Scale for a customer to fit 2 x VUPPM Meters into one unit of his Crockwood Mastering Console Frame.
OdBFS in centre. Will do a 500 Series version as well.
Looks great! any chance of a vertical compact box kit coming soon?
Link to JLM audio album on facebook where a photo of the Stereo VUPPM prototype that was at Integrate expo can be seen as well as some other new bits and pieces.
Would it be possible to adapt this to be a stereo balance meter?, with peak and average balance simultaneously.
I really like the meters on wavelab & would love to create a hardware version
tonmeister wrote:Would it be possible to adapt this to be a stereo balance meter?, with peak and average balance simultaneously.
I really like the meters on wavelab & would love to create a hardware version
I am looking at doing a phase / Balance meter version. But I need to get more info together on which way to go with this. So all suggestions on this thread are very useful in developing this version.
Using VUPPMGR40 instead of analog VU meter in LA2A, LA3A clones and most other opto comps.
The VUPPMGR40 can have its balanced input connected direct across the output of the LA2A or LA3A clones for VUPPM output level.
Use the circuits below to interface the Gain Reduction T4B to the CV input on the VUPPMGR40. Set jumper on VUPPM PCB for 5v to 0v CV input.
A switch between SW terminal and 0v on the VUPPM PCB with switch between VUPPM output level and Gain reduction.
May also want to switch the meter to reverse direction on Gain reduction by switching that jumper as well.
Fantastic work Joe!
These (Crockwood-) Meters look sooooooooo beautiful!!!
Are you going to sell the panels (the acrylic/perspex part) in your shop as well?
kante1603 wrote:Fantastic work Joe!
These (Crockwood-) Meters look sooooooooo beautiful!!!
Are you going to sell the panels (the acrylic/perspex part) in your shop as well?
Best regards from munich,
Udo.
HI Udo Thanks for the nice comments on the meters
Yes we will have a small Hammond case and scale front panel solution available on the web shop in the new year for stereo meter like shown in the photo's on the jlmaudio facebook.
And a horizontal beveled edge scale for 1 rack unit cases and a vertical 500 / 51X series fronts.
Joe Malone wrote:
Yes we will have a small Hammond case and scale front panel solution available on the web shop in the new year for stereo meter like shown in the photo's on the jlmaudio facebook.
Cool!So in the beginning of the new year (sorry,please excuse my impatience)
Joe Malone wrote:
And a horizontal beveled edge scale for 1 rack unit cases and a vertical 500 / 51X series fronts.
That would be great as i´m planing to integrate 2 meters in my new (big) project,kind of a combined summing amp with an inserts switching board and ms capabilities.I love the idea being able to visually monitor vu and peak in the same place
Joe Malone wrote:
Yes we will have a small Hammond case and scale front panel solution available on the web shop in the new year for stereo meter like shown in the photo's on the jlmaudio facebook.
Cool!So in the beginning of the new year (sorry,please excuse my impatience)
Joe Malone wrote:
And a horizontal beveled edge scale for 1 rack unit cases and a vertical 500 / 51X series fronts.
That would be great as i´m planing to integrate 2 meters in my new (big) project,kind of a combined summing amp with an inserts switching board and ms capabilities.I love the idea being able to visually monitor vu and peak in the same place
Best regards,
Udo.
HI Udo
Sorry I had missed this post. If you are after vertical I have some of the beveled scales used for the crookwood meters here or if you have a rough idea of what you need for your project send me a email with some sizes you would need.