For those with spanking new JLM meters, for cutout see http://www.nissei.com.cn/productVM-22.html
Joe, do you recommend any particular resistor in series with the led/lamp? I'm running just +48V and 0V at the moment and don't want to introduce a new power level if I can avoid it. I'd normally be thinking something between 2K and 5K.
Thanks
JLM 1U Meter
Moderator: Joe Malone
JLM 1U Meter
Chris P
---------------------------------------------------------
I do lots of things. I believe eclectic skills are best.
---------------------------------------------------------
I do lots of things. I believe eclectic skills are best.
- Joe Malone
- Site Admin
- Posts: 2080
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact:
Re: JLM 1U Meter
The JLM meter has a white LED which needs to be run about 5mA to 10mA. So on 48v a 4k7 to 10k resistor will work.
Joe
JLM Audio
Capturing Audio without Injury
JLM Audio
Capturing Audio without Injury
Re: JLM 1U Meter
About 3mm as I recall.
Chris P
---------------------------------------------------------
I do lots of things. I believe eclectic skills are best.
---------------------------------------------------------
I do lots of things. I believe eclectic skills are best.