BA500v2 Mic Pre Amp BUILD THREAD 500/51X

Support for JLM Audio Kits

Moderator: Joe Malone

Post Reply
User avatar
Joe Malone
Site Admin
Posts: 1780
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

BA500v2 Mic Pre Amp BUILD THREAD 500/51X

Post by Joe Malone »

BA500v2 Mic Pre Amp BUILD THREAD 500/51X

Under construction
Please feel free to ask for any extra info you need while building on this thread so I can add it here.

The BA500v2 is a 500/51x version of our well know Baby Animal mic pre.
Image

BA500v2 PCB build map
http://jlmaudio.com/builds/maps/BA500_map.html

GB500v2 PCB build map
http://jlmaudio.com/builds/maps/BA500_G ... n_map.html

FETDI500v2 PCB build map
http://jlmaudio.com/builds/maps/BA500_FETDI_map.html

If you are not 100% with resistor colour codes use a multimeter to check values as you place the resistors
Image

Click on images to enlarge
Toggle switch & LED detail.jpg
BA500v2 front detail.jpg
BA500v2 front angle.jpg
BA500v2 back angle.jpg
BA500v2 side.jpg
You do not have the required permissions to view the files attached to this post.
Joe :-)
JLM Audio
Capturing Audio without Injury

Post Reply