Palpigrade Build Thread

Support for JLM Audio Kits

Moderator: Joe Malone

Post Reply
User avatar
Joe Malone
Site Admin
Posts: 1622
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Palpigrade Build Thread

Post by Joe Malone »

Palpigrade Build Thread
8 Channel balanced to unbalanced output driver kit.

Link to Tradigrade Build thread


Notes and Errata
C2 & C3 are 39pF not 47pF. 39pF gives 200kHz flat bandwidth.
Extra 39pF can be added under pcb to improve CMRR over whole audio bandwidth.

PCB size is 55.25mm (2.18") x 77.35mm (3.05") with 4 x PCB mounting holes 47mm (1.85") x 56.7mm (2.23")
Or PCB can be mounted on the 2 x DB25 mounting bolts.

Image

Image

Image
You do not have the required permissions to view the files attached to this post.
Joe :-)
JLM Audio
Capturing Audio without Injury

Post Reply