Joe,
My CBS Audimax ll RZ mod is done, and works, but I think I'm running a little hot.
At the junction of R39 and R35 I get 299V
At the junction of R32 and R30 I get 76V
Where R30 joins Pin 9 of J1 I get 61.5V
Please advise.
Nick Stevens
CBS Audimax ll mod
Moderator: Joe Malone
- Joe Malone
- Site Admin
- Posts: 2081
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact:
Re: CBS Audimax ll mod
Yes from memory we had to set the mains voltage setting on the power transformer higher to get the filament down to 6.3vacdtrnick wrote:Joe,
My CBS Audimax ll RZ mod is done, and works, but I think I'm running a little hot.
At the junction of R39 and R35 I get 299V
At the junction of R32 and R30 I get 76V
Where R30 joins Pin 9 of J1 I get 61.5V
Please advise.
Nick Stevens
Joe
JLM Audio
Capturing Audio without Injury
JLM Audio
Capturing Audio without Injury