CBS Audimax ll mod

Support for JLM Audio Kits

Moderator: Joe Malone

Post Reply
dtrnick
Posts: 5
Joined: Sat Jan 19, 2019 1:19 am

CBS Audimax ll mod

Post by dtrnick »

Joe,
My CBS Audimax ll RZ mod is done, and works, but I think I'm running a little hot.
At the junction of R39 and R35 I get 299V
At the junction of R32 and R30 I get 76V
Where R30 joins Pin 9 of J1 I get 61.5V

Please advise.
Nick Stevens

User avatar
Joe Malone
Site Admin
Posts: 2070
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Re: CBS Audimax ll mod

Post by Joe Malone »

dtrnick wrote:Joe,
My CBS Audimax ll RZ mod is done, and works, but I think I'm running a little hot.
At the junction of R39 and R35 I get 299V
At the junction of R32 and R30 I get 76V
Where R30 joins Pin 9 of J1 I get 61.5V

Please advise.
Nick Stevens
Yes from memory we had to set the mains voltage setting on the power transformer higher to get the filament down to 6.3vac
Joe :-)
JLM Audio
Capturing Audio without Injury

dtrnick
Posts: 5
Joined: Sat Jan 19, 2019 1:19 am

Re: CBS Audimax ll mod

Post by dtrnick »

Thanks

Post Reply