Talkback Comp Build Thread

Support for JLM Audio Kits

Moderator: Joe Malone

mrclunk
Posts: 7
Joined: Wed May 22, 2019 10:41 pm

Re: Talkback Comp Build Thread

Post by mrclunk »

I'm sorry Joe, i ment to update my post...
Mic worked fine using the standard (2 x 6k8) supply as on the pcb. It's an Astrada conference mic 952.353UK (just the gooseneck mic part)
All working nicely on our Calrec. I added a 1k Log pot across the output for volume and a cheap OEP a262a2e transformer to split the output.
One to the desk auxs and a separate out to patchbay for remote session down Skype etc.

User avatar
Joe Malone
Site Admin
Posts: 1631
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Re: Talkback Comp Build Thread

Post by Joe Malone »

mrclunk wrote:I'm sorry Joe, i ment to update my post...
Mic worked fine using the standard (2 x 6k8) supply as on the pcb. It's an Astrada conference mic 952.353UK (just the gooseneck mic part)
All working nicely on our Calrec. I added a 1k Log pot across the output for volume and a cheap OEP a262a2e transformer to split the output.
One to the desk auxs and a separate out to patchbay for remote session down Skype etc.
Cool great to hear you got it all working :-)
Joe :-)
JLM Audio
Capturing Audio without Injury

Post Reply