Is one power station enough for 8 preamps ?

Support for JLM Audio Kits

Moderator: Joe Malone

Post Reply
Kenan29
Posts: 2
Joined: Mon Apr 14, 2014 8:40 pm

Is one power station enough for 8 preamps ?

Post by Kenan29 »

Hi,

I have 4 Channels strip (preamp and EQ) coming from an old French mixer : "Plus 30". It's fed with one Power station (with 6 Amp bridge rectifier) +-18v for the OpAmps (2 x DA1034N and 8 x LF366) and +24v (for the relays)...

I now have 4 extras channels I want to put in the same rack, I also intend to power 8 regurgitator kits ; do you think the Powerstation is powerful enough for 8 channels and the kits ?

All the best

Kenan
Last edited by Kenan29 on Sun Apr 19, 2015 8:59 am, edited 1 time in total.

Kenan29
Posts: 2
Joined: Mon Apr 14, 2014 8:40 pm

Re: Is one power station enough ?

Post by Kenan29 »

Hi Guys,
I can't say that my post has been really popular but I need some help on this. Does anyone has an idea of the electric consumption of such channel strip ?

Eventually, I could generate the 24V with another power supply but I can't use V1 for four channels et V2 the others four because the connection is made thru a board (picture) with regulators.

Could it be a solution to set V1 and V2 on 18V and pair V1 and V2 to double the current and make 18V 3A and -18V 3A ? Thanks for your help.

Image

Image

Post Reply