12PAKAMP - boards/ kits

Support for JLM Audio Kits

Moderator: Joe Malone

Post Reply
thomashood
Posts: 2
Joined: Wed May 08, 2013 8:59 pm

12PAKAMP - boards/ kits

Post by thomashood »

https://www.facebook.com/photo.php?fbid ... t=1&ref=nf

...are the boards available for these yet?

Thanks,

Thomas Hood

User avatar
Joe Malone
Site Admin
Posts: 2069
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Re: 12PAKAMP - boards/ kits

Post by Joe Malone »

thomashood wrote:https://www.facebook.com/photo.php?fbid ... t=1&ref=nf

...are the boards available for these yet?

Thanks,

Thomas Hood
We do have the PCB's they are made to work direct with the Hypex DLCP DSP card as 6 channels of bridged amps per PCB.

The link you show we modified them for another Dolby labs job so we had 24 amps using 2 12PAKAMP PCB modified.

Best to email me with how you would like to use them so I can advice if they will do what you want or not.
Joe :-)
JLM Audio
Capturing Audio without Injury

thomashood
Posts: 2
Joined: Wed May 08, 2013 8:59 pm

Re: 12PAKAMP - boards/ kits

Post by thomashood »

My use-case is to drive various computer-based DSP active speakers via a multi-channel audio interface.

I think for a reasonably flexible setup I'd like to build something very close to the dolby setup, but allocating a subset of the channels as bridged.

I.e. 16 bridged for 8 bass/ mid bass drivers and 8 standard for mids and treble would be useful.

Regards,

Tom

User avatar
Joe Malone
Site Admin
Posts: 2069
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Re: 12PAKAMP - boards/ kits

Post by Joe Malone »

thomashood wrote:My use-case is to drive various computer-based DSP active speakers via a multi-channel audio interface.

I think for a reasonably flexible setup I'd like to build something very close to the dolby setup, but allocating a subset of the channels as bridged.

I.e. 16 bridged for 8 bass/ mid bass drivers and 8 standard for mids and treble would be useful.

Regards,

Tom
The easiest way to do what you want is to use 3 x 8PAKAMP kits as it has everything you need for the above setup without any modifications.

Direct link to 8PAKAMP kit info
http://www.jlmaudio.com/shop/index.php? ... ductId=142
Joe :-)
JLM Audio
Capturing Audio without Injury

Post Reply