https://www.facebook.com/photo.php?fbid ... t=1&ref=nf
...are the boards available for these yet?
Thanks,
Thomas Hood
12PAKAMP - boards/ kits
Moderator: Joe Malone
- Joe Malone
- Site Admin
- Posts: 2078
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact:
Re: 12PAKAMP - boards/ kits
We do have the PCB's they are made to work direct with the Hypex DLCP DSP card as 6 channels of bridged amps per PCB.thomashood wrote:https://www.facebook.com/photo.php?fbid ... t=1&ref=nf
...are the boards available for these yet?
Thanks,
Thomas Hood
The link you show we modified them for another Dolby labs job so we had 24 amps using 2 12PAKAMP PCB modified.
Best to email me with how you would like to use them so I can advice if they will do what you want or not.
Joe
JLM Audio
Capturing Audio without Injury
JLM Audio
Capturing Audio without Injury
-
- Posts: 2
- Joined: Wed May 08, 2013 8:59 pm
Re: 12PAKAMP - boards/ kits
My use-case is to drive various computer-based DSP active speakers via a multi-channel audio interface.
I think for a reasonably flexible setup I'd like to build something very close to the dolby setup, but allocating a subset of the channels as bridged.
I.e. 16 bridged for 8 bass/ mid bass drivers and 8 standard for mids and treble would be useful.
Regards,
Tom
I think for a reasonably flexible setup I'd like to build something very close to the dolby setup, but allocating a subset of the channels as bridged.
I.e. 16 bridged for 8 bass/ mid bass drivers and 8 standard for mids and treble would be useful.
Regards,
Tom
- Joe Malone
- Site Admin
- Posts: 2078
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact:
Re: 12PAKAMP - boards/ kits
The easiest way to do what you want is to use 3 x 8PAKAMP kits as it has everything you need for the above setup without any modifications.thomashood wrote:My use-case is to drive various computer-based DSP active speakers via a multi-channel audio interface.
I think for a reasonably flexible setup I'd like to build something very close to the dolby setup, but allocating a subset of the channels as bridged.
I.e. 16 bridged for 8 bass/ mid bass drivers and 8 standard for mids and treble would be useful.
Regards,
Tom
Direct link to 8PAKAMP kit info
http://www.jlmaudio.com/shop/index.php? ... ductId=142
Joe
JLM Audio
Capturing Audio without Injury
JLM Audio
Capturing Audio without Injury