Hi all,
I'm thinking about building either the 1272 or Dual99v 2 channel kit. Does anyone here no what the noise specs of each kit are?
Sorry if this has been discussed before, I can't find anything on it.
Cheers,
Michael
Looking for specs
Moderator: Joe Malone
- Joe Malone
- Site Admin
- Posts: 2070
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact:
Re: Looking for specs
Both 1290 and Dual99v can perform to the noise spec of EIN -129dB as long as input transformers are not close to any power transformers in other equipment. Which is why they can both do 75dB quietly.Broken wrote:Hi all,
I'm thinking about building either the 1272 or Dual99v 2 channel kit. Does anyone here no what the noise specs of each kit are?
Sorry if this has been discussed before, I can't find anything on it.
Cheers,
Michael
Also since they are both made up of 2 low gain preamp stages they have generally less high end hiss than modern high gain opamp type mic pres.
We have heaps of guys doing very quiet recordings even with low output ribbon microphones with Dual99v mic pres because of there very low noise floor and high gain capability.
Joe
JLM Audio
Capturing Audio without Injury
JLM Audio
Capturing Audio without Injury