BA on +/- 24V

Support for JLM Audio Kits

Moderator: Joe Malone

Post Reply
User avatar
Holger
Posts: 30
Joined: Sat Mar 10, 2007 7:40 pm
Location: Hamburg, Germany
Contact:

BA on +/- 24V

Post by Holger »

Is it possible to run a BA on +/- 24V just as a gain stage with input transformer and DOA ? I don't have 48V in the box I'm currently working on.

User avatar
Joe Malone
Site Admin
Posts: 2069
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Re: BA on +/- 24V

Post by Joe Malone »

Holger wrote:Is it possible to run a BA on +/- 24V just as a gain stage with input transformer and DOA ? I don't have 48V in the box I'm currently working on.
Yes wire +/-24v to BA PCB +V = +24v and BA PCB 0v = -24v. Wire opamp pin marked 1/2V to +/-24v supply 0v.
Do not fit the 10k resistor beside the Rload resistor and the 220k and 10k beside it. This will allow the gain and +/-out to be referenced to the new 0v of the +/-24v.
The ground plane on the BA PCB will now be at -24v. Short out the 10R resistor. Done

Image
Joe :-)
JLM Audio
Capturing Audio without Injury

User avatar
Holger
Posts: 30
Joined: Sat Mar 10, 2007 7:40 pm
Location: Hamburg, Germany
Contact:

Re: BA on +/- 24V

Post by Holger »

I don't know why it works but it works :D
Thanks.

Post Reply