V8
Moderator: Joe Malone
V8
Regarding R1 on the little PCB: what value goes where (lots of holes)?
- Joe Malone
- Site Admin
- Posts: 2078
- Joined: Wed Jan 24, 2007 11:35 pm
- Location: Brisbane, Australia
- Contact:
Re: V8
V8 PCB takes 1 x 9 pin 47R SIP 8 buss resistor pack. Pin 1 has a dot on the side of the ressistor pack and is the square pad on the PCB which is the common end of the 8 buss resistors.Holger wrote:Regarding R1 on the little PCB: what value goes where (lots of holes)?
Joe
JLM Audio
Capturing Audio without Injury
JLM Audio
Capturing Audio without Injury