V8

Support for JLM Audio Kits

Moderator: Joe Malone

Post Reply
User avatar
Holger
Posts: 30
Joined: Sat Mar 10, 2007 7:40 pm
Location: Hamburg, Germany
Contact:

V8

Post by Holger »

Regarding R1 on the little PCB: what value goes where (lots of holes)?

User avatar
Joe Malone
Site Admin
Posts: 2069
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Re: V8

Post by Joe Malone »

Holger wrote:Regarding R1 on the little PCB: what value goes where (lots of holes)?
V8 PCB takes 1 x 9 pin 47R SIP 8 buss resistor pack. Pin 1 has a dot on the side of the ressistor pack and is the square pad on the PCB which is the common end of the 8 buss resistors.
Joe :-)
JLM Audio
Capturing Audio without Injury

Post Reply