Sound fine as most 16 channel console do not draw 1.5A for +/-15v but would have to check what the 5v rail runs to make sure it is within the 1.5A. Do you have a schematic or any info on the desk?matthewsawicki wrote:Hey!
I've been wanting to purchase a couple of these kits to retrofit into an older mixer that I have as well as to replace the PSU of ADA8000's. I was just hoping to hear that this would be a good idea or not.
The mixer is 16 channel inline console with mic pres and phantom power requiring ±15v rails, +5v rail, and +48 phantom. From what I've seen, 300ma should be plenty for the phantom, and I was planning on getting the 6amp mod.
ADA8000's need ±15v, +5v, and +48v as well. I was thinking the 6amp mod could power 2 or possibly 3 of the units. Any advice on this?
I was planning on matching them to your World Transformer kits as well.
Many thanks!
For the ADA8000 3 units will be fine on 1 powerstation.