Adding insert path to BA?

Support for JLM Audio Kits

Moderator: Joe Malone

Post Reply
tenchijin2
Posts: 12
Joined: Thu Mar 12, 2009 1:15 pm

Adding insert path to BA?

Post by tenchijin2 »

How hard would it be to include an insert path (1/4" TRS) to a baby animal? I'm thinking I'll eventually want to track with some outboard compressors.

User avatar
Joe Malone
Site Admin
Posts: 2068
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Re: Adding insert path to BA?

Post by Joe Malone »

The BA pcb is a one stage mic pre so there is no where to insert except after it. The BAD PCB can have a insert added into the wire going from the O to the output level pot easily as it is a 2 stage mic pre.
Joe :-)
JLM Audio
Capturing Audio without Injury

tenchijin2
Posts: 12
Joined: Thu Mar 12, 2009 1:15 pm

Re: Adding insert path to BA?

Post by tenchijin2 »

I see. I suppose it really won't matter since I'll be using a A/D converter. I can go mic->ba->compressor->A/D converter, right?

Aric

User avatar
Joe Malone
Site Admin
Posts: 2068
Joined: Wed Jan 24, 2007 11:35 pm
Location: Brisbane, Australia
Contact:

Re: Adding insert path to BA?

Post by Joe Malone »

Yes that is correct
Joe :-)
JLM Audio
Capturing Audio without Injury

Post Reply